Track Editing Filters - Alesis Fusion Reference Manual

3
Chapter 3: Fusion Modes

Track Editing Filters

[About these filters: When you record pitch changes, continuous
controller changes, or aftertouch into a MIDI sequencer, the event
window can easily get cluttered with lots of data that you may not need
to see. This is a problem because it becomes harder to spot data that you
actually want to edit. For that reason, we've added this event editor
filter—this filter lets you avoid displaying much of the data that would
otherwise clutter your event editor. Keep in mind, this filter does not
actually remove any data from your tracks—it simply does not display
them in the event editor.]
Menu: Song/Editor/Event/Filter
Parameter: Include Notes
Value Range: On, Off
Turn this parameter off if you do not want the event editor to display
note data. Otherwise, leave it on for normal operation.
Menu: Song/Editor/Event/Filter
Parameter: Include Controllers
Value Range: On, Off
Turn this parameter off if you do not want the event editor to display
continuous controller data. Otherwise, leave it on for normal operation.
Menu: Song/Editor/Event/Filter
Parameter: Include Aftertouch
Value Range: On, Off
Turn this parameter off if you do not want the event editor to display
aftertouch data. Otherwise, leave it on for normal operation.
Menu: Song/Editor/Event/Filter
Parameter: Include Pitch
Value Range: On, Off
Turn this parameter off if you do not want the event editor to display
pitch changes. Otherwise, leave it on for normal operation.
145