Table of Contents
Advertisement
Specifications
MAIN UNIT CX-LEM30
TUNER
FM tuning range
87.5 MHz to 108 MHz
FM usable sensitivity (IHF)
13.2 dBf
FM antenna terminal
75 ohms (unbalanced)
AM tuning range
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
AM usable sensitivity
350 µV/m
AM antenna
Loop antenna
AMPLIFIER
Power output
8 W + 8 W (40 Hz - 20 kHz, THD
less than 1 %, 6 ohms)
10 W + 10 W (1 kHz, THD 10 %,
6 ohms)
Total harmonic distortion
0.08 % (4 W, 1 kHz, 6 ohms, DIN
AUDIO)
Input
AUX IN: 500 mV
Outputs
SPEAKERS: 6 ohms or more
PHONES: 32 ohms or more
CASSETTE DECK
Track format
4 tracks, 2 channels stereo
Frequency response
50 Hz – 10000 Hz
Recording system
AC bias
Heads
Recording/playback 1, erase 1
CD PLAYER
Laser
Semiconductor laser ( = 780 nm)
D/A converter
1 bit dual
Signal-to-noise ratio
80 dB (1 kHz, 0 dB)
Wow and flutter
Unmeasurable
GENERAL
Power requirements
120 V AC, 60 Hz
Power consumption
30 W
Dimensions (W H D)
163 230 219.3 mm
(6
1
/
9
1
/
2
8
Weight
2.7 kg (5 lbs 15 oz)
SPEAKER SYSTEM SX-LEM30
Speakers system
2 way, bass reflex (magnetic
shielded)
Speaker units
Woofer: 100 mm cone
Tweeter: 20 mm dome
Impedance
6 ohms
Dimensions (W H D)
140 230 195 mm
(5
5
/
9
1
/
8
8
Weight
1.9 kg (4 lbs 3 oz)
Specifications and external appearance are subject to change
without notice.
COPYRIGHT
Check copyright laws relevant to recordings from discs, radio
or tape for the country where the unit is to be used.
8
3
/
in.)
4
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
7
3
/
in.)
4
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
CAUTION
Modifications or adjustments to this product, which are
not expressly approved by the manufacturer, may void the
user's right or authority to operate this product.
En
19
Hide quick links:
Advertisement
Table of Contents
