Aiwa BMZ-K5D Operating Instructions Manual page 72

JPEG image files cannot be played.
• The DATA CD is not recorded in JPEG format
that conforms to ISO9660 Level 1/Level 2 or
Joliet.
• The JPEG image file does not have the extension
".JPG" or ".JPEG."
• The data is not formatted in JPEG even though it
has the extension ".JPG" or ".JPEG."
• Length or width of image is more than 4720 dots.
• Remove the disc and select "CUSTOM SETUP"
from the setup items. Then select "DATA CD
PRIORITY" and set to "JPEG" again (page 30).
• Playback is possible up to 8 levels.
• Progressive JPEG format files cannot be played
on this system.
The album title, track title and ID3 tag do not
appear correctly.
• Use a disc that conforms with ISO 9660 level 1,
level 2, or Joliet in the expansion format.
• The ID3 tag displays only the track title
information and applies only to version 1.
The disc title, album title, track title and ID3 tag
appear as
• The character codes that can be displayed by this
system are numbers and alphabet only. Other
characters appear as
The sound loses stereo effect when you play a
DVD, VIDEO CD, CD or MP3.
• Select "VF/MPX OFF" in step 3 of "Singing
along: Karaoke" (page 56)
• Make sure the system is connected appropriately.
The surround effect is difficult to hear when
you are playing a Dolby Digital or MPEG audio
sound track.
• Make sure the SOUND FIELD function is on
(page 55).
• Check the speaker connections and settings (pages
8 and 36).
• Depending on the DVD, the output signal may not
be the entire 5.1 channel. It may be monaural or
stereo even if the sound track is recorded in Dolby
Digital or MPEG audio format.
GB
72
. The CD characters appear as
.
The recording was not done properly when
making a digital recording from the CD/DVD
player of this system to an optional
component connected to the DIGITAL OUT
jack.
• Audio data is output from the DIGITAL OUT jack
without any surround effects or other sound
processing, so that the audio data is output slightly
ahead of the sound from the speakers. Therefore,
start the optional component recording in advance
when making a digital recording to a connected
optional component (MD deck, etc.).
Picture
There is no picture.
• Press FUNCTION repeatedly to switch the
function to DVD.
• Check that the system is connected securely.
• The video cable is damaged. Replace it with a new
one.
• Make sure you connect the system to the video
input jack of your TV (page 9).
.
• Make sure you turn on the TV and operate the TV
correctly.
• Make sure you select the video input on the TV so
that you can view the pictures from the system.
• Make sure you set the color system correctly,
according to your TV (color) system.
Picture noise appears.
• Clean the disc.
• If video from your DVD player has to go through
your VCR to get to your TV, the copy-protection
applied to some DVD programs could affect
picture quality. If you still experience problems
after checking your connections, please try
connecting your DVD player directly to your
TV's S video-input, if your TV is equipped with
this input (page 9).
• The color system is different. Set the color system
to match your TV (page 32).
The aspect ratio of the screen cannot be
changed even though you set "TV TYPE" in
"SCREEN SETUP" in the Setup Display when
you play a wide picture.
• The aspect ratio is fixed on your DVD.
• If you connect the system with the S-video cable,
connect directly to the TV. Otherwise, you may
not change the aspect ratio.
• Depending on the TV, you may not change the
aspect ratio.