Aiwa BMZ-K5D Operating Instructions Manual page 10

When using a TV
Turn on the TV and select the video input so that
you can view the pictures from this system.
To output audio to the TV from this system, use
audio cords (not supplied) to connect the MD
(AUX) out L/R jacks to the audio input of your
TV or the INPUT AUDIO L/R jacks of the
EURO AV adapter.
When connecting a video deck
Connect the TV and the video deck using video and
audio cords (not supplied) as shown below.
Video deck
If you connect a video deck between this system and the
TV, you may experience video leakage when watching
the video signal from this system. Do not connect a
video deck between this system and the TV.
Tip
For even higher quality video images:
– Use an optional component video cord to connect the
COMPONENT VIDEO input jacks on your TV to
the COMPONENT VIDEO OUT jacks of this
system. If your TV is compatible with progressive
format file signals, use this connection and set
"COMPONENT OUT" to "PROGRESSIVE" in
"Adjusting the TV screen" (page 31).
– You can use an optional S-video cord to connect the
S VIDEO input jack on your TV to the S VIDEO
OUT jack of this system.
GB
10
TV
System
Do not connect
directly.
6 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Depending on the model, the VOLTAGE
SELECTOR may differ.
* Saudi Arabian model's voltage selector has 2
levels (120 – 127 V/220 V).
7 Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press [/1, the system turns on
and the demonstration automatically ends.
If the supplied adapter on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adapter).
8 (Except for Latin American and Euro/
UK, Russian models)
Set the color system to PAL or NTSC
depending on the color system of your
TV.
The color system is factory set to NTSC for
region code 3 models, and PAL for other
region code models. Each time you perfrom
the procedure below, the color system
changes as follows:
NTSC y PAL
Use the buttons on the system.
1
Press [/1 to turn off the system.
2
Press [/1 while holding down X on the
unit.
The system turns on and the color
system is changed.
9 Connect the speakers to the unit
(Front, center*, surround* speakers)
120V
220V
230-240V