Aiwa BMZ-K5D Operating Instructions Manual page 37

Adjusting the speaker volume
and level
1
Press DVD SETUP in stop mode.
The Setup Display appears.
2
Press M or m repeatedly to select
"SPEAKER SETUP," then press ENTER.
3
Press M or m repeatedly to select
"TEST TONE," then press ENTER.
4
Press M or m repeatedly to select "ON,"
then press ENTER.
You will hear the test tone from each
speaker in sequence.
5
From your listening position, adjust the
value of "BALANCE" and "LEVEL"
using M/m/</,.
The test tone is emitted from both left and
right speakers simultaneously.
6
Press ENTER when you finish adjusting.
7
Press M or m repeatedly to select
"TEST TONE," then press ENTER.
8
Press M or m repeatedly to select
"OFF," then press ENTER.
Tip
To adjust the balance or the level without listening to
the test tone, select "BALANCE" or "LEVEL" in step
3 and press ENTER, then adjust the balance or level
using M/m and press ENTER.
x LEVEL (BMZ-K7D only)
You can vary the level of each speaker as
follows. Be sure to set "TEST TONE" to "ON"
for easy adjustment.
The default settings are underlined.
CENTER Adjust the level of the center
0 dB speaker (–6 dB to +6 dB, 1 dB
increments).
SURROUND Adjust the level of the surround
LEFT speaker (–6 dB to +6 dB, 1 dB
0 dB increments).
SURROUND
RIGHT
0 dB
SUBWOOFER Adjust the level of the sub
0 dB woofer (–10 dB to +10 dB, 1 dB
increments).
x BALANCE (BMZ-K7D only)
You can vary the balance of the left and right
speakers as follows. The default settings are
underlined.
FRONT Adjust the balance between the
– – – (CENTER) front left and right speakers (6
steps left or right).
x TEST TONE (BMZ-K7D only)
The speakers will emit a test tone to adjust
"BALANCE" and "LEVEL."
The default settings are underlined.
OFF The test tone is not emitted from
the speakers.
ON The test tone is emitted from each
speaker in sequence while
adjusting balance or level. When
you select one of the "SPEAKER
SETUP" items, the test tone is
emitted from both left and right
speakers simultaneously.
x LFE (BMZ-K5D only)
You can enjoy low frequency effect with LFE
channel recorded on discs.
The default settings are underlined.
ON The LFE channel is output.
OFF The LFE channel is not output.
Note
If there is excessive wow or flutter when
recording audio from a DVD, set "LFE" to
"OFF."
GB
37