Table of Contents
Advertisement
9.
If you need to remove the camera cable, disconnect the cable from the camera module (1), peel the
camera cable off the display rear cover (2), and the remove the cable (3). The cable is secured with
adhesive.
The camera cable is available as spare part number M47673-001.
10.
If you need to remove the hinges from the display:
a.
Remove the silver tape from the inside of each hinge (1).
b.
Remove the three Phillips broadhead M2.5 × 3.0 screws (2) from each hinge.
c.
Remove the hinges from the display rear cover (3).
The display hinges are available as spare part number M47678-001.
11.
If you need to remove the hinge covers from the hinges:
a.
Remove the Phillips M2.0 × 3.0 screw from the inside of each hinge cover (1).
b.
Slide the hinge covers off the hinges (2).
The hinge covers are available as spare part number M47689-001.
Component replacement procedures
37
Advertisement
Table of Contents
