Table of Contents
Advertisement
1.
Remove the two rubber feet from the bottom of the computer (1).
2.
Remove the six Phillips M2.0 × 8.0 screws (2).
3.
Remove the two screw covers (3).
4.
Remove the two Phillips M2.0 × 5.0 screws (4).
5.
Starting near the hinge, use a tool to work around and release the edges of the bottom cover from the
computer (1).
6.
Remove the bottom cover from the computer (2).
To replace the bottom cover, reverse the removal procedures.
Battery
To remove the battery, use this procedure and illustration.
24
Chapter 5 Removal and replacement procedures for authorized service provider parts
Advertisement
Table of Contents
