Airlink101 AWLL5025 Quick Installation Manual

802.11g usb xr adapter

Hide thumbs Also See for AWLL5025:

Download this manual See also: User Manual

Enlarged version

Quick Installation Guide

802.11g USB XR™ Adapter

Model # AWLL5025

Section 1

This Quick Installation Guide only provides the basic instructions. For more

advanced features, please refer to the User's Manual in the provided CD.

Note: Do not connect the USB Adapter to your computer until you have reached

the appointed step.

For Windows 98SE and ME users, you may be prompted to insert the Windows

98SE or ME CD during the driver installation. Be sure to have your Windows 98SE

or ME CD ready.

Ver. 1A

Package Content:

•

USB Adapter

•

Driver & Utility CD

•

Quick Installation Guide

Step 1

Insert the Driver & Utility CD into your CD drive and select Install Utility

and Driver from the menu.

Note: If the Autorun screen doesn't appear automatically, go to Start, Run, and

type D:\autorun.exe (where D is the letter of your CD drive) and click OK.

Step 2

Click Next at the welcome screen.

Step 3

Click Next to accept the default destination folder.

Table of Contents

Page 1: Quick Installation Guide
Quick Installation Guide 802.11g USB XR™ Adapter Model # AWLL5025 Section 1 Install Utility and Driver This Quick Installation Guide only provides the basic instructions. For more advanced features, please refer to the User’s Manual in the provided CD. Note: Do not connect the USB Adapter to your computer until you have reached the appointed step.
Page 2 Step 4 Verify Yes, I want to restart my computer now is selected and click Finish to restart your computer. Step 5 After the computer is restarted, connect the USB Adapter to your computer’s USB port. Step 6 If Windows asks to connect to Windows Update, select No, not this time and click Next.
Page 3: Configure The Usb Adapter
Section 3 Section 2 Configure the USB Adapter To open the USB Adapter’s utility go to Start > (All) Programs > Airlink101 USB XR Adapter Utility > Airlink101 USB XR Adapter Utility. Step 1 Go to the AP List tab, select the SSID (Network Name) of the wireless network you wish to connect to, and click Connect.
Page 4: Technical Support
Step 4 Select the proper encryption setting for your wireless router or access point from the drop-down menu and click Next. Step 5 Follow the on-screen instructions to complete the encryption settings. Click Complete when finished. Step 6 You should see a blue circle around the antenna icon indicating a valid connection.