Snmp - Airlink101 AR695W User Manual

3.4.5 SNMP

Parameter
Enable SNMP
Get Community
Set Community
IP 1~4
SNMP Version
Click on Save after you finished all settings.
Description
You must check either Local or Remote or both to enable SNMP
function. If Local is checked, this device will response request
from LAN. If Remote is checked, this device will response request
from WAN.
Setting the community of GetRequest your device will response.
Setting the community of SetRequest your device will accept.
Input your SNMP Management PC's IP here. User has to
configure to where this device should send SNMP Trap message.
Please select proper SNMP Version that your SNMP
Management software supports.
79