Table of Contents
Advertisement
Port
Enable
Schedule Rule#
Inbound Filter
Click on Save after you finished all settings.
Please input the port number here. You can define a single port
(80) or a range of ports (1000-1999). Add prefix "T" or "U" to
specify TCP or UDP protocol, for example, T80, U53,
U2000-2999. No prefix indicates both TCP and UDP are defined.
Leaving this field blank indicates all ports.
Check/uncheck Enable to enable/disable each Packet Filtering
rule.
Enter a Schedule Rule number to activate the filtering rule only
within the desired time frame. Please refer to 3.4.7 Schedule
Rule for detailed setting instructions. Set 0 to let the filtering rule
always take effect.
Click Inbound Filter button to go to Inbound Packet Filter settings.
60
Advertisement
Table of Contents
