Table of Contents
Advertisement
Remote IP Address
Ports
QoS Priority
Enable
Schedule Rule#
Click on Save after you finished all settings.
Specify a remote (destination) IP address that will be affected by
this rule.
Please input the range of remote (destination) port number that
will be affected by this rule. If you want to apply this rule on port
80 to 90, please input "80-90"; if you want to apply this rule on a
single port, just input the port number, such as 80. If the remote
(destination) IP address and /or port number is universal, just
leave it blank.
Assign High, Normal, or Low priority to the specific network client.
Check to enable individual QoS rule.
Enter a Schedule Rule number to activate the QoS rule only
within the desired time frame. Please refer to 3.4.7 Schedule
Rule for detailed setting instructions.
78
Advertisement
Table of Contents
