Table of Contents
Advertisement
Parameter
IP Mode
My IP Address
My Subnet Mask
Gateway IP
Server IP Address/Name
PPTP Account
PPTP Password
Connection ID
Maximum Idle Time
Connection Control
Maximum Transmission Unit (MTU)
Description
Select the type of how you obtain IP address from your service
provider here: Static IP Address or Dynamic IP Address.
Enter the IP address assigned by your ISP if you select Static IP
Address.
Enter the Subnet Mask assigned by your ISP if you select Static
IP Address.
Enter the Gateway IP address assigned by your ISP if you select
Static IP Address.
Enter the IP address of the PPTP server.
Enter the User Name for your PPTP account here. You can
obtain this information from your ISP.
Enter the password for your PPTP account here. You can obtain
this information from your ISP.
Enter the connection ID if your ISP requires it. This is optional.
The amount of time of inactivity before disconnecting your PPTP
session. Set it to zero or enable "Auto-reconnect" to disable this
feature.
There are 3 modes for you to control the Internet connection:
Connect-on-demand: Router will connect to the ISP when its
client send outgoing packets.
Auto Reconnect (Always-on): Router will keep the connection
to the ISP after the connection is established.
Manually: Router will not connect to the ISP until user clicks the
Connect button on the Status-page.
Most ISPs offer MTU value to users. The default MTU value is 0
(auto).
35
Advertisement
Table of Contents
