Advertisement
1a. Mount on Wood Stud Wall
1a
• Make sure the mounting screws are anchored into the center of the studs. Use of a stud finder is highly
recommended.
• The installer is responsible to provide hardware for other types of mounting situations.
• The installer must verify the supporting surface will safely support the combined load of the equipment
and all attached hardware and components.
WARNING
4
60mm
55mm
(2.2")
()
2.4"
4.5mm
Ø
(
3/16")
Ø
1
Find and mark the
exact location of
mounting holes
2
3
Drill pilot holes
Ensure holes are level
Screw mount
into wall
Advertisement
