Short Description; Connect The Lines; Connection Diagram - TCS FBO1100-0400 Product Information

04/2013
 connection via a standard PBX / PSTN analogue interface
 sensor to trigger a connection establishment / separate dialing register
 sensor requires the connection of a potential-free switch
 dialing register with 4, 16, 32, or 64 call numbers with max. 16 digits, can be pro-
grammed/adjusted, delivery state: 16 dialing register
 telephone buttons of standard telephones and cell phones switch door release, lights
and create control functions via multi-frequency dialing
 specific connection to 56 front-door stations with a standard (cell phone) telephone
 specific internal call from up to 3 indoor stations with a standard (cell phone) telephone
 specific triggering of up to 10 actuators per dialing register with a standard (cell phone)
telephone
 day / night mode
 call diversion (from the indoor station to the TK-Interface)
 actuator, potential-free relay contact (two-way contact: 24 V DC / 1 A)
 switch time of the relay ex works: 10 seconds / adjustable via MFV (multi-frequency di-
aling)
 up to 64 FBO1100 can be connected to one TCS:BUS
 status indication for operation modes and transmission state
 optical error indication
 configuration via DTMF (multi-frequency dialing) or configuration software configo™
(as of version 1.6.0.6)
 busy tone detection to terminate the conversation automatically, only hang-up the hand-
set
 energy-saving when in stand-by mode (240 mW)
 The FBO1100 is connected to the PBX / PSTN just like an analogue telephone.
 The FBO1100 needs a TCS:BUS, that at least consists of power supply and control unit
and a front-door station. Alternatively, also indoor stations can use the FBO1100 as in-
terface.

Connection diagram

TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129  Mail: hotline@tcsag.de
7

Short description

Connect the lines

Subject to technical changes.
PI_FBO1100_uk 1A