Commissioning Steps - TCS FBO1100-0400 Product Information

Commissioning steps

 Install the devices at the TCS system completely and connect the FBO1100 to the tele-
phone system (see wiring example).
 Check the a-, b- and P-wire against each other for short-circuits.
 Switch on the mains voltage.
 The yellow LED (state PBX / PSTN connection) flashes ON, once with a long break
(This corresponds with the TK-Interface (16 dialing register = delivery state).
(blink mode: also see Indication and operating elements, page 6, )
 First check the connection of the FBO1100 to the telephone system with a call to the
telephone number which is assigned to the FBO1100 from the telephone system.
 Then, check the connection of the FBO1100 to the front-door station by pressing the
Button 1 as well as the function of the Buttons 7 and 8. The connection can be end-
ed by pressing the Button 9 or by hanging up the handset.
Thus, the system is basically ready to operate and can be configured.
If the commissioning check is not successful, errors may have occurred.
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129  Mail: hotline@tcsag.de
10
Subject to technical changes.
PI_FBO1100_uk 1A
04/2013