Short Description; Functional Description; Functions At The Tcs:bus; Indication And Operating Elements - TCS FBI4500-0100 Product Information

11/2012

Functional description

 The PTZ camera interface, connected to a PTZ camera, can be operated as stand-
alone camera or allocated to a (video) front-door station at the TCS:BUS
 The device provides the video image of the connected PTZ camera via two-wire video
signal.
 The interface controls the PTZ camera via a standard RS485 connection. Supported
types of protocol: Pelco D, Pelco P and Samsung.

Functions at the TCS:BUS

 By navigating with the control keys (resp. Navigation buttons) LEFT, RIGHT, UP,
DOWN at the indoor station, a specific section of the image can be selected via a
PTZ camera.
 With the protocol "topstitch" or with the "control function" preferred positions can be
controlled.

The configuration software configo

Indication and operating elements

Potentiometer
TCS TürControlSysteme AG  TCS Hotline: +49 (0) 41 94 / 98 81 188
FAX: +49 (0) 41 94 / 98 81 29  Mail: hotline@tcsag.de
5

Short description

®
TM
supports the devices as of version 1.7.x.
A two-wire video sender converts the asymmetric camera
signal into symmetric signal, which can be used in the
TCS video system. This can be displayed on all video
indoor stations. With the potentiometer, the video level is
manually adjustable:
 Turning right: increase the output level
 Turning left: reduce the output level
®
.
Subject to technical changes.
PI_FBI4500-0100.doc 2A