Delta AC MAX Installation And Operation Manual page 12

Secure mounting bracket
Configure dip switches
1. The cable holder is optional and depicted in the figure for
demonstration
recommended bolt types:
Masonry walls: 1/4" expansion bolts.

Torque: 8.8 N·m (78 lb·in)
Finished walls supported by wood studs: #8 wood

screws of 2" or above screw length.
Torque: 3 N·m (26 lb·in)
2. Align the EVSE with the screw holes on the mounting
bracket.
3. Secure the EVSE on the mounting bracket with the
supplied Torx T30 screws.
Torque: 1.5 N·m (13 lb·in)
Configure the dip switches with following steps
12
purposes. The following
v1.0.0
are