Changing The Basic Settings; Changing The Superuser Name And Password - IBM 3454-FCE Customer Install Manual

The main status page displays a graphical representation of the PDU power outlets and
input status: (See Figure 31)
The left pane displays the menus and submenus for the PDU.

The right pane shows the status of the outlets, input voltage, output voltage,

frequency, current and power, watt-hour consumption, and cumulative kilowatt
hour power consumption. If you connect an environmental monitored probe, the
temperature and humidity environment conditions are displayed.

Changing the basic settings

Use the Network/Access menu to configure the PDU system parameters such as the
superuser name, password, IP address, date, and time. (See Figure 32)

Changing the superuser name and password

You can set the user name and password of the administrator configuring the PDU on
the Configuration Utility window.
To change the superuser name and password, complete the following steps:
1. From the main status page, in the left navigation pane, click Network/Access.
2. Click on "Password" to change superusers' password.
© Copyright IBM Corporation 2020.
Figure 31 – Main menu of the WEB utility
Customer Install Guide, PDU 54