Panasonic SA-XH170EB Service Manual page 80

Step 5 Lift up D-Amp P.C.B. as arrow shown.
Step 6 Place the D-Amp P.C.B. back to original position.
Step 7 Connect 3P Fan Wire at the connector (CN5401) on D-
Amp P.C.B..
Step 8 Connect 18P FFC at the connector (CN5402) on D-Amp
P.C.B..
Step 9 Connect 4P Cable at the connector (CN5400) on D-
Amp P.C.B..
Step 10 Proceed to check and repair Side B of D-Amp P.C.B..
13.3.2. Checking and Repairing D-Amp
P.C.B. (Side A)
Step 1 Remove Top Cabinet.
Step 2 Remove Rear Panel.
Step 3 Remove 2 screws.
Step 4 Flip the D-Amp P.C.B. and position it onto the insulated
material.
Step 5 Proceed to check and repair Side A of D-Amp P.C.B..
80