Panasonic SA-XH170EB Service Manual page 39

9.6.2. Process Flow (2/2)
Process
Update Completed
Step 5
Eject the disc and power off main
unit.
Step 6
Power on the unit and do system
initialize.
Step 7 Update process finish.
Item
Description
If firmware software update
completes successfully:
GUI Display 1.3:
"Firmware update is completed,
please open the tray and
remove the disc."
FL Display (Main Unit) will
display "GOOD" as
"FL Display 1.6" shown.
FL/ GUI Display
GUI Display 1.3:
FL Display 1.6:
39
Remarks
To initialize, press and hold
main unit [OPEN/CLOSE]
then press remote control
key [ 10].