Appendix; Ctm-A2415 Base Backup Battery; Ctm-A2415Hc Handset Battery - VTech Analog Contemporary Series Master User Manual

Find handset
Use this feature to find all registered
cordless handsets.
Start paging
Press FIND HS (FIND HANDSET) on the
telephone base when the telephone is not
in use. All idle cordless handsets beep for 60
seconds.
End paging
• Press FIND HS (FIND HANDSET) again on the
telephone base; or
• Press any key on the cordless handset to
stop the paging tone.

Appendix

CTM-A2415 Base backup battery

It takes up to 12 hours for the battery to be
fully charged. When the base experiences
a power cut, you can expect the following
performance:
Operation
While in handset use
(talking*)
While in
speakerphone mode
on the telephone
base (talking*)
While not in use
(standby**)
* Operating times vary depending on your
actual use and the age of the battery.
** Base is not charging or in use.
The battery needs charging when:
• A new battery is installed in the base.
The battery needs replacement when:
• REPLACE BATTERY LED illuminates on the
base.
Operating time
Up to 90 minutes
Up to 30 minutes
Up to 90 minutes
EN - 19

CTM-A2415HC Handset battery

It takes up to 12 hours for the battery to be
fully charged. When it is fully charged, you can
expect the following performance:
Operation
While in handset use
(talking*)
While in
speakerphone mode
(talking*)
While not in use
(standby**)
* Operating times vary depending on your
actual use and the age of the battery.
** Handset is not charging or in use.
The battery needs charging when:
• A new battery is installed in the handset.
• LOW BATTERY LED illuminates on the
cordless handset.
Operating time
Up to 7 hours
Up to 5 hours
Up to 7 days