Commissioning The Device; Notes On Commissioning And Operation - Siemens SIMATIC IPC477E Operating Instructions Manual

Commissioning the device

4.1

Notes on commissioning and operation

Danger of burns
The surface of the device can reach temperatures of over 70 °C. Any unprotected contact
may cause burns.
Avoid direct contact during operation of the device. Touch the device only with appropriate
protective gloves.
Note
Windows Embedded Standard 7 - Note the EWF and FBWF information
Two configurable write filters (Enhanced Write Filter and File Based Write Filter) are provided
with Windows Embedded Standard. Read the EWF/FBWF information if you activate and use
them, otherwise you may experience data loss.
• Enhanced Write Filter (EWF) (Page 74)
• File Based Write Filter (FBWF) (Page 76)
Note
Configuring memory cards in the device
Memory cards used in a device need to be configured on that device. Memory cards
configured on other devices will not boot as the drive parameters will be different.
Notes on operation
Note
During the startup procedure...
• Make sure that there are no conductive liquids on the touch screen during startup.
• Do not touch the touch screen during startup.
The device automatically calibrates the touch screen during startup.
Requirement
• The device is connected to the power supply.
• The protective conductor is connected.
• The connection cables are plugged in correctly.
• The following hardware is available for initial commissioning:
– One USB keyboard
– One USB mouse
62
CAUTION
Operating Instructions, 11/2020, A5E37455003-AF
4
SIMATIC IPC477E