English
❏
Connect the external devices only when those total rated current is less than 4.2 A.
❏
To power off the product, use the application or OS function. Do not use the operations shown
below unless the product cannot be turned off due to an application or OS problem. Doing so
may cause loss of unsaved data, require OS recovery, or damage the SSD or other hardware.
• Forced termination by holding down the power button for approx.4 sec.
• Power shutdown by turning off the circuit breaker on the distribution board or by disconnecting the AC
cable/DC cable
The same phenomenon may also occur due to power shutdown caused by power failure/
temporary power failure.
Caution Labels
The caution label on the product indicates the following precautions.
K
!
CAUTION:
Do not touch the thermal head and the frame on its side because they can be very hot after printing.
Caution about Warranty
This product assumes that the customer uses the software provided by Epson. If the customer
modifi es the software, any repairs for malfunctions that occur may be charged, even if they occur
during the warranty period, and we may not be able to respond to product inquiries. If installing
any software, be sure to thoroughly evaluate it and use it at your own discretion.
4