Epson TM-T88VI-DT2 User Manual page 16

English
Installing the Customer Display
If you use the product with the optional exclusive customer display (Model: DM-D110), follow the
steps below to install it.
For models without a pole
Use the following items. The base and screws are included with the customer display.
1. Attach the base on the TM-T88VI-DT2 with the three screws. (➀ in the illustration)
2. Pass the USB cable of the customer display through the base. (➁ in the illustration)
3. Align the dowel hole in the customer display and the dowel on the base to attach the customer
display on the base. (➂ in the illustration)
4. Connect the USB cable to the USB port. (U
Customer display Base Screws
)
"Interface" on page 7
16