Cleaning - Epson TM-T88VI-DT2 User Manual

English

Cleaning

Cleaning the Product Case
Be sure to turn off the product, and wipe the dirt off the product case with a dry cloth or a damp
cloth. For persistent dirt, use a cloth slightly moistened with mild neutral detergent.
!
CAUTION:
Never clean the product with alcohol, benzine, thinner, or other such solvents. Doing so may
damage or break the parts made of plastic and rubber.
Cleaning the Thermal Head
To maintain print quality, Epson recommends cleaning the thermal head periodically (generally
every 3 months) by following the steps below.
K
!
CAUTION:
❏
The thermal head and the frame on its side can be very hot after printing. Be careful not to touch
them and to let them cool before you clean it.
❏
Do not damage the thermal head by touching it with your fingers or any hard object.
1. Turn off the product. (U
2. Open the roll paper cover. (U
3. Clean the thermal elements of the thermal head with a cotton swab moistened with an alcohol
solvent (ethanol or IPA).
"Turning Power On/Off" on page 20
"Opening the roll paper cover" on page 21
)
)
Thermal head
25