Placement; Wall Mount - Philips 8000 Series User Manual

•
Do not use any batteries other than
those specified.
•
Do not heat or disassemble batteries.
•
Never throw then in fire or water.
•
Do not carry or store batteries with other
metallic objects. Doing so could cause
batteries to short circuit, leak or explode.
•
Never recharge a battery unless it is
confirmed to be a rechargeable type.

Placement

Place your SoundBar as shown below.

Wall mount

Note
•
Improper wall mounting may result in
accident, injury or damage. If you have any
query, contact Consumer Care in your country.
•
Before wall mounting, make sure the wall can
support the weight of your Soundbar.
•
Before wall mount, you need not remove the
rubber feet at the bottom of the Soundbar,
otherwise the rubber feet cannot be fixed
back.
•
Depending on the type of wall mounting your
Soundbar, make sure that you use screws of a
suitable length and diameter.
•
Please check whether the USB port on the
back of the Soundbar is connected to a USB
device. If it is found that the connected USB
device affects the wall-mount, you need to
use another USB device of the appropriate size.
Screw length/diameter
3.5-4mm/0.14"-0.16"
>25mm/0.98"
Suggested wall mounting height
You are recommended to install the TV first
before wall mounting the soundbar. With a
TV preinstalled, wall mount the soundbar
50mm/2.0" in distance from the bottom of
the TV.
1
Drill 2 parallel holes (Ø 3-8mm each
according to wall type) on the wall. The
distance between the holes should be
797 mm / 31.38".
» Secure the dowels and screws in the
holes.
2
Remove the screws (x4) from the main
unit.
» Attach the wall brackets (x2) to the
main unit with the screws removed
from the main unit.
4mm/
0.16"
9