Philips 8000 Series User Manual page 13

Note
For iOS version only
Wi-Fi network used by iPhone should be
switched temporarily to Play-Fi device AP
and restart Philips Sound APP to complete
the product's Wi-Fi setup. See the steps
below:
•
Go to Settings.
•
Select the Play-Fi
device in the Wi-Fi
set up.
6
After successful Wi-Fi connection,
the Wi-Fi light indicatar on the front
cabinet will stop pulsing and turn solid.
Once you set up this product on your
Wi-Fi network, you can control it from
any smartphone or tablet on the same
network.
» When using the APP to play music,
the display panel will show PLAY-FI.
7
After connection, you can change the
device name. There are several names
to choose from or create your own by
choosing Custom Name at the end of
the name list. Otherwise, it follows the
default name.
•
Select Wi-Fi setting.
•
Return to Philips
Sound App to
continue the set up.
8
After connection, this product may
perform a software update. Upgrade to
the latest software when it is your firet
time set up. The software upgrade may
take several minutes. Do not unplug
your speaker, turn off your device, or
leave the network during the update.
AirPlay setup
Use AirPlay to set up the Wi-Fi connection of
iOS device (iOS7 or later) and soundbar.
1
iOS device: Settings > Wi-Fi > select
home network [Play-Fi device (xxxxxx)]
2
Launch the Philips Sound App powered
by DTS Play-Fi. Follow the instructions
in the App to connect this product to
your Wi-Fi network.
» After successful Wi-Fi connection,
the Wi-Fi light indicatar on the front
cabinet will stop pulsing and turn
solid. Once you set up this product
on your Wi-Fi network, you can
control it from any smartphone or
tablet on the same network.
» When using the APP to play music,
the display panel will show PLAY-FI.
3
After connection, you can change the
device name. There are several names
to choose from or create your own by
choosing Custom Name at the end of
the name list. Otherwise, it follows the
default name.
4
After connection, this product may
perform a software update.
Upgrade to the latest software when
it is your first time set up. The software
upgrade may take several minutes. Do
not unplug your speaker, turn off your
device, or leave the network during the
update.
13