Placement; Wall Mount - Philips Fidelio User Manual

Placement

For best results, place your Soundbar as
shown below.

Wall mount

Note
•
Improper wall mounting may result in accident,
injury or damage. If you have any query, contact
Consumer Care in your country.
•
Before wall mounting, make sure the wall can
support the weight of your soundbar.
•
Before wall mount, you need not remove the
rubber feet at the bottom of the soundbar,
•
Depending on the type of wall mounting your
soundbar, make sure that you use screws of a
suitable length and diameter.
•
Please check whether the USB port on the
back of the soundbar is connected to a USB
device. If it is found that the connected USB
another USB device of the appropriate size.
Screw length/diameter
3.5-4mm/0.14 -0.16"
>32mm/1.26"
4mm/
0.16"
•
accordance with the installation instructions.
•
•
before wall mounting the soundbar. With
1
~50mm/2.0"
743mm / 29.2"
2
3
1
Drill 2 parallel holes (Diameter 3-8mm
each according to wall type) on the wall.
»
743mm / 29.2"
» You can use the wall mount
template provided for helping the
drilling holes position on the wall.
2
Secure the dowels and screws in the
holes.
» Be sure to leave a 3.5-4mm gap
between the wall and the screw's
head.
3
Attach the wall brackets (x2) into on
the unit.
4
Hang the soundbar on the fastening
screws.
3.5-4mm/0.14 -0.16"
4mm/
0.16"
>32mm/1.26"
4
EN 11