Fiat BRAVO Owner's Handbook Manual page 22

TURNING THE ALARM ON
GETTING TO
With the doors, bonnet and tailgate closed and the
KNOW YOUR CAR
ignition key either turned to STOP or removed,
point the key with remote control towards the
vehicle and press and release button
SAFETY
Excluding some markets, the system produces an
acoustic signal (beep) and enables door locking.
The switching on of the alarm is preceded by
a self-diagnosis stage: if a fault is detected, the
STARTING AND
system emits a new acoustic signal together with
DRIVING
the display of a message (see "Warning lights and
messages" chapter).
WARNING LIGHTS
In this case switch off the alarm by pressing
AND MESSAGES
check that all the doors, bonnet and tailgate are
closed correctly; then switch the alarm back on by
pressing the
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
18
.
button.
If a door, the bonnet and the tailgate are not
properly shut, they will be excluded from the check
by the alarm system.
If the alarm emits an acoustic signal even when the
doors, bonnet and tailgate are correctly closed, a
failure has occurred in system operation.
Go to a Fiat Dealership.
IMPORTANT The alarm does not come on when
the central locking is activated using the metal
insert in the key.
IMPORTANT The alarm is adapted to meet
requirements in various countries.
,