4-3. Do-it-yourself maintenance
■
Checking the fluid level
Check the fluid level under the unloaded condition.
Start the engine and put the vehicle height in the "LO" (Low)
STEP
1
mode and then "N" (Normal) mode.
Turn off the ignition switch about 30 seconds after the "N" (Nor-
STEP
2
mal) mode indicator light comes on.
Make sure the fluid level is between "MAX" and "MIN".
STEP
3
If the fluid level is lower than "MIN", have suspension fluid AHC filled by
your Lexus dealer.
Battery
■
Exterior
Make sure that the battery terminals are not corroded and that there are
no loose connections, cracks, or loose clamps.
288
Terminals
Hold-down clamp