3-2. Using the audio system
When the cassette player does not operate correctly due to the cassette record-
■
ing conditions
Forwarding to the beginning of a track, repeat, blank tape skip and fast-forward
may not be possible in the following situations:
The interval between tracks is less than 3 seconds (beginning of track and
●
repeat playback) or less than 15 seconds (blank tape skip).
When there is noise between 2 tracks.
●
The beginning and end of subsequent tracks are not clearly defined.
●
Cleaning the cassette player
■
Cassette player components (heads, capstan, pinch rollers) should be cleaned at
least once a month using a cleaning tape to remove dirt and dust that can easily
build up.
Using long playing cassette tapes
■
Avoid using tapes with a length of more than 90 minutes, as the tape used is very
thin and may become tangled in the cassette player.
NOTICE
Cassette tapes that cannot be used
■
Do not use a cassette tape if it has been damaged or tangled or if its label is peeling
off. Such tapes may affect playing speed and may also get stuck in the player.
Cassette player precautions
■
Store cassette tapes away from direct sunlight.
●
Do not insert anything other than cassette tapes into the cassette player.
●
Do not apply oil to the cassette player.
●
196