Stealth Cam FLX CAMERA Instruction Manual page 23

Using Your Camera in FIELD mode
FIELD
!
• Bring Mobile device with the APP open within Bluetooth Range (50 feet) of the
Stealth Cam FLX Camera. (Mobile device Bluetooth must be turned on)
Once the Stealth Cam Camera is in range, the in range cameras go from gray to
•
color on the camera screen within the APP and it also shows the BT Signal
Strength.
Once selected the camera will automatically aturn on its on board Wi-Fi Router.
•
Your mobile device will automatically connect to the Wi-Fi Router. If it takes
more than 30 seconds to connect you may need to connect to the Cameras Wi-Fi
Router manually in the Mobile Devices Wi-Fi Settings.
• After the camera is connected to the Camera select the camera to enter Photo
Preview and Settings Page. Here you can Preview your photos stored on the
camera and change any camera settings. While Previewing Photos you can select
photos/videos to transfer to your mobile device.
When finished, press the "Disconnect" button located at the bottom of the APP
•
to terminate Wi-Fi connect and put the camera back in capture mode.
Using Your Camera in LOCAL NETWORK mode
LOCL NETWORK
!
• FLX Camera is setup to connect to the user's local Wi-Fi network.
The camera will upload new photos to the server based on the Connection
•
Interval.
• User will get a notification from the server when new photos are available.
Camera can be accessed from anywhere through the free APP.
•
www.stealthcam.com
877-­‐269-­‐8490
23
Page