Stealth Cam FLX CAMERA Instruction Manual page 10

CAMERA SETUP
Setup Date: Set the Date for the camera.
!
The default date is 01/01/19
Setup Time: Set the Time for the camera.
!
The default time is 12:00AM
Time Zone: Set the Time Zone where you're using the camera.
!
Eastern
!
Central (Default)
!
Mountain
!
Pacific
!
Alaskan
!
Hawaiian
Time Format: Set whether the time will be kept using a 12 Hour format or 24 Hour format.
!
12 Hour (Default)
!
24 Hour
Mode (Operational Mode): This allows the user to determine which of the three operation
modes they want the camera to be set to: PIR Photo, Time Lapse, or PIR Video. The following
sequence is for PIR Photo.
!
PIR Photo (Default): Camera takes Image per PIR trigger.
o
PIR Photo Settings are: Photo Resolution, PIR Delay, Blur Reduction, Photo Burst,
Operating Hours, Camera Name, Temperature, Information Bar, Latitude, Longitude,
Factory Reset, Security Key, Format SD Card, Language, Software Upgrade.
o
Images will be named as STC_XXXX.jpg in the DCIM/100STLTH folder, where XXXX is
the current image/video count.
www.stealthcam.com
877-­‐269-­‐8490
10
Page