CAMERA SETUP (cont.)
Temperature (Default – Fahrenheit)
!
o
The temperature is imprinted on each photo in either Celsius or Fahrenheit.
Information Bar (Default – ON)
!
o
The Stealth Cam logo, Time, Date, Temperature Moon Phase, and Camera Name are
imprinted on the bottom of each picture.
o
The information bar must be proportiate to the size of the photo so that when the
photos are resized, the information bar is still visible.
o
The information bar should look like the following example:
Stealth Cam Logo
Camera Name (Default – STEALTH CAM)
!
o
The camera name is imprinted on each of the photos.
o
The name is limited to 13 characters.
Security Key (Default – Off): This function turns the Security Key ON or OFF.
!
o
Security Code (Default – 0000)
!
This feature will prevent a user from accessing any of the options on the camera unless
the user enters a 4 digits security code first.
!
The security code will be 4 digits and each digit can be any number 0-9 or letter A-Z.
!
The security code must be entered if the number is not the default.
!
If the security code is the default number, then the user does not need to enter the
code.
!
If the user cannot remember the correct security key, then the camera can be
unlocked using a "key code". You will need to contact the Customer Service Dept for
assistance at 877-269-8490.
www.stealthcam.com
877-‐269-‐8490
Time Date
Moon
Temp Phase Camera Name
16
Page