Specifications - Culligan Medallist Plus Sulfur-OX3 Owner's Manual

Specifications

6
01035157 C 10/20
Culligan Medallist Plus Sulfur-OX3 Filter
Control Valve
Overall Conditioner Height
Media Tank Dimensions (D x H)
Filter Media Type
Underbedding
Cullsan
Capacity¹
Freeboard²
Rated Hydrogen Sulfide
Max. Hydrogen Sulfide⁵
Minimum Alkalinity
pH for Hydrogen Sulfide Removal³
Service Flow @ Pressure Drop (Clean Bed)
Normal
Maximum⁴
Operating Pressure
Operating Temperature
Electrical Requirements
Power Consumption, Continuous/Maximum
Drain Flow
Reconditioning Time
Backwash
Air Draw
Fast Rinse
¹ Capacity based on 4 gpm and 3 mg/l of Hydrogen Sulfide.
² Measure from top of media bed to top of inlet fitting.
³ Not recommended for iron removal.
⁴ Max flow rates and pressure drop characteristics have not been validated by the Water Quality Association.
The maximum specified flow rate at which the system will deliver treated water,
as validated by the Water Quality Association, is defined as service flow.
⁵ Not validated by Water Quality Association.
10" Sulfur-OX3
1" reinforced thermoplastic
67"
10" x 54" tank
1.0 cu. ft. Cullar S
20 lbs.
500 gallons
29"
1 ppm
3 ppm
100 ppm
7.0 - 8.5
4 gpm @ 2.9 psi
6 gpm @ 9 psi
20-60 psi
33-120° F (1-48° C)
28 Volts/50-60 Hz
3 Watts/21.6 Watts
5.5 gpm
15 minutes
40 minutes
5 minutes