Cabinet (L) Assembly; Grip Cabinet Assembly - Sony DCR-IP5 Service Manual

2-10.BT-003 BOARD (IP7BT/IP7E), CABINET (L) ASSEMBLY
7 BT-003
board
6 Two screws
(M1.4 × 2), ace
2-11.GRIP CABINET ASSEMBLY, CONTROL SWITCH BLOCK (FK-1900)
3 Two screws
(M1.4 × 2.5),
lock ace
2 Screw (M1.4 × 2),
lock ace
6 Screw
(M1.4 × 2.5),
lock ace
Control switch block
(FK-1900)
5 Two screws
(M1.4 × 2.5),
lock ace
(IP7BT/IP7E)
4 MS release knob
3 Compression spring
2 MS knob retainer
assembly
1 Screw
(M1.4 × 2.5),
lock ace
5 FP-367 flexible board
(15P)
4 Screw (M1.4 × 2.5),
lock ace
7 Tapping screw
(M1.7 × 3.5)
1 Screw
(M1.4 × 2.5),
lock ace
8 Grip arm assembly,
Cabinet (L) joint
Dowel
2 Screw
(M1.4 × 2.5),
lock ace
1 Screw
(M1.4 × 2.5),
lock ace
6 Jack cover
7 Screw (M2 × 3)
Note: This screw (M2 × 3) is MEC-processed. If the screw
is are removed once, it cannot be re-used.
When re-assembling, use the new MEC screw.

2 Grip cabinet assembly

2-13
DCR-IP5/IP5E/IP7BT/IP7E
3 Lens cabinet
(L) section

0 Cabinet (L) assembly

5 JC retainer
plate
4 Screw
(M1.4 × 2.5),
lock ace
8 List strap
9 Strap bracket
1 Control switch block (FK-1900),
Battery terminal board