Developing Internal Timing Sense (Quiet Count); Warm Ups - Roland V-Drums TD-50X Quick Start Manual

Performing

Developing Internal Timing Sense (QUIET COUNT)

This lets you practice keeping the tempo with your body. For the first
few measures, the click is heard at the specified volume, but for the
next few measures the click is not heard. This cycle of several measures
will continue until you stop it.
1 .
In the QUIET COUNT screen, press the [F5] (START)
button.
2 .
Strike the pad in time with the click.
5 The click will sound during the first few measures. When you reach
the last measure during which the click will sound, the screen will
indicate "Ready . . "
5 When the click stops sounding, the screen indication will change to
"Quiet . "
Continue striking the pads during this time.
5 After the Quiet region, the proportion of your strikes that were
played at an accurate tempo are shown as a
3 .
Press the [F4] (STOP) button.
4 .
Press the [EXIT] button to finish.

WARM UPS

In this mode you'll successively practice steps 1–3, be graded on your
performance at each step, and then receive a final evaluation.
You can choose one of three courses (5/10/15 minutes), ranging from
easy to difficult. You can also adjust the tempo according to your level
of skill.
MEMO
After starting WARM UPS, you can press the [F5] (PAUSE) button to
pause or resume.
While paused, you can press the [F4] (STOP) button to stop.
1 .
In the WARM UPS screen, press the [F5] (START)
button.
Step 1: Change-Up
In this step, the rhythm type will change every two measures.
Starting from half notes, the note values will gradually become
shorter, and will then return to half notes; this change in rhythms
will be repeated.
18
Step 2: Auto Up/Down
* Auto Up/Down will be executed if Duration is 10 MINS or 15 MINS.
* Auto Up/Down does not let you use the
* The current tempo value will be the lower tempo limit.
Step 3:Time Check
Overall evaluation
"% . "
2 .
The tempo will gradually be raised and lowered.
The tempo will increase by 1 BPM (beat-per-minute) for each beat
until the click reaches the upper limit; then the tempo will continue
slowing down by 1 BPM until it reaches the initial tempo.
the current tempo.
At this step, the accuracy of your playing will be checked against
the click. You can see in the screen if you are ahead, behind or on
the beat.
This grades your performance at each step, and displays the overall
evaluation.
To resume practicing, press the [F5] (RETRY) button.
EXCELLENT!, VERY GOOD!, GOOD, AVERAGE,
Evaluation (display)
START OVER
Press the [EXIT] button to finish.
[TEMPO] knob to adjust