Sony STR-DN1080 Service Manual page 37

SIRCS DISABLE MODE
The SIRCS signal of the remote commander which this unit re-
ceives can be disabled.
Procedure:
1. Press the [ ] button to turn the power on.
1
2. While pressing the [DISPLAY MODE] button, press the [MU-
SIC], [MOVIE], [2CH/MULTI] button in order
3. The message "REMOTE OFF" appears and the SIRCS signal
of the remote commander is disabled.
Releasing method:
1. Press the [ ] button to turn the power on.
1
2. While pressing the [DISPLAY MODE] button, press the [MU-
SIC], [MOVIE], [2CH/MULTI] button in order again.
3. The message "REMOTE ON" appears and the SIRCS signal
of the remote commander is enabled.
SIRCS MODE CHANGE
The command mode of the remote commander which this unit re-
ceives can be changed.
Procedure:
1. While pressing the [MUSIC] and the [PURE DIRECT] but-
tons, press the [ ] button to turn the power on.
1
2. Either the message "C. MODE AV1" or "C. MODE AV2" ap-
pears. Select the desired mode.
(Each time the same operation is repeated, it changes "AV1"
and "AV2" alternately)
HDMI SPECIAL MENU: MODE 1
When DTS-HD can not be outputted due to some problem, it can
be returned to EDID that supports DTS-HD.
Procedure:
1. While pressing the [TUNER PRESET −] and the [PURE DI-
RECT] buttons, press the [
2. The message "HDMI.M1 ON" appears, it return to EDID that
supports DTS-HD.
Releasing method:
1. While pressing the [TUNER PRESET −] and the [PURE DI-
RECT] buttons, press the [
again.
2. The message "HDMI.M1 OFF" appears, it return to normal
EDID.
] button to turn the power on.
1
] button to turn the power on
1
STR-DN1080/ZA810ES
HDMI SPECIAL MENU: MODE 2
When DTS:X can not be outputted due to some problem, it can be
returned to EDID that supports standard DTS:X.
Procedure:
1. While pressing the [TUNER PRESET +] and the [PURE DI-
RECT] buttons, press the [
2. The message "HDMI.M2 ON" appears, it return to EDID that
supports standard DTS:X.
Releasing method:
1. While pressing the [TUNER PRESET +] and the [PURE DI-
RECT] buttons, press the [
again.
2. The message "HDMI.M2 OFF" appears, it return to normal
EDID.
] button to turn the power on.
1
] button to turn the power on
1
37
SYS SET