Maintenance/System Diagnosis - Grandstream Networks GVC3212 Administration Manual

Config Provision
Download and
Process All
Available Config
Files
Config Provision
Advanced Settings
Validate Server
Certificate
Allow AutoConfig
Service Access
mDNS Override
Server
Factory Reset

Maintenance/System Diagnosis

Syslog
Syslog Protocol
Syslog Server
By default, the device will provision the first available config in the order of cfgMAC,
cfgMAC.xml, cfgMODEL.xml, and cfg.xml(corresponding to device specific, model
specific, and global configs). If set to "Yes", the device will download and apply
(override) all available configs in the order of cfgMAC, cfgMAC.xml, cfgMODEL.xml,
cfg.xml.
Device will download the configuration files and provision by the order you set.
It is used to configure whether to validate the server certificate when download the
firmware/config file. If set to "Yes", the device will download the firmware/config file
only from the legitimate server. The default setting is "No".
Set to allow access to the AutoConfig service. If not checked, access to
service.ipvideotalk.com will be disabled.
It is used to set if the device will broadcast the Multicast DNS (mDNS) message during
booting up to allow itself to be discovered and be configured by the SIP platform. If it
is set to "User Type A', the device will broadcast the MDNS message "A_grandstream-
cfg.local"; if it is set to "Use Type SRV", the MDNS message will be
"SRV_grandstream-cfg.local". The default setting is "Use Type A".
Restore to factory default settings. Note: Please backup the data to avoid data loss.
Select the transport protocol over which log messages will be carried.

UDP: Syslog messages will be sent over UDP.

SSL/TLS: Syslog messages will be sent securely over TLS connection. To
upload server CA certificate, follow below steps:
 Copy CA file in SD card and plug it to the phone.
 Go to LCD menu SettingsSecurity SettingsInstall from SD card to
install the CA file.
Configures the URI which the phone system will send the syslog messages to. The
default setting is "log.ipvideotalk.com".
GVC3212 Administration Guide
Version 1.0.1.6
P a g e | 25