LG LDE4415ST Service Manual page 43

REMOvING THE OvEN DOOR HANDLE & GLASS (For the Lower door)
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electric shock.
CAUTION
• Use caution when handling sheet
metal parts while servicing the
range.
- Some parts may have sharp edges, which
could result in injury.
1. Remove the oven door from the range (see page
3-17 for the procedure).
2. Place the oven door on a padded work surface
with the front glass facing down.
3. Remove the 4 top door screws.
4 top liner screws
4. Remove the 5 bottom screws from the door liner.
5 bottom liner screws
5. Lift the liner assembly off the front glass and set
it aside.
COMPONENT ACCESS
6. To remove the door handle & door decor
a) Remove the 2 door handle screws and lift the
door handle off door decor and slide up the
door decor.
7. To remove the hinge hanger assembly and glass
a) Place the door liner assembly on a padded
work surface with door frame facing up. (same
as Step 2)
b) Remove the 2 bottom liner screws.
c) Remove the 2 top liner screws.
Hinge hangers assembly
2 bottom liner screws
d) Lift the door frame out of the inner cover.
e) Remove the hinge hanger assembly and lift
the inner glass and bracket out of the inner
cover.
Inner cover
3-24
Handle
Screws
Door decor
Door frame
2 top liner screws
Inner oven door glass
and bracket