Side Monitor (Optional)
An image captured by side camera (5) or rear view camera (4)
is displayed on side monitor (1) located in the cab.
IMPORTANT: Image displayed on the side monitor is of
auxiliary nature at best. Actual position and distance
of people and objects in the monitor will be different.
When operating the machine, pay thorough attention
to the surrounding situation.
Layout
1. Side Monitor
2. Power Switch
3. Screen Changeover Switch
4. Rear View Camera
5. Side Camera
Monitor Operation
Each time power switch (2) of side monitor (1) is pressed,
power of side monitor (1) turns ON/OFF.
When power is ON, image will be displayed on side monitor
(1).
Press screen changeover switch (2) while the side monitor is
ON, image displayed on the side monitor switches.
There are three image patterns. Each time screen
changeover switch (2) is pressed, the image is switched.
Image of Rear View Camera (4)
Image of Side Camera (5)
Image of Rear View Camera (4) and Side Camera (5)
(displayed side by side)
IMPORTANT: In order to obtain a clear image, clean the
lens and the monitor display before operating the
machine.
f
NOTE: The monitor and camera lens surface is a resin
product. Lightly wipe the surface with a wet clean cloth. Never
use an organic solvent.
IMPORTANT:
Never attempt to change mounting position of rear
view camera (4) and side camera (5).
Consult your authorized dealer if any abnormality is
found on the image of monitor (1).
OPERATOR'S STATION
1-117
1
3
MDCQ-001
1
2
MDCQ-002
4
MDCQ-003
5
MDCQ-004