Pilot Control Shut-Off Lever; Engine Stop Switch - Hitachi ZAXIS 135US-5B Operator's Manual

Pilot Control Shut-Off Lever

Pilot control shut-off lever (1) functions to prevent the
machine from being mistakenly operated when the operator is
getting on or off the machine.
d
WARNING:
 Always pull pilot control shut-off lever (1) into the
full LOCK position. Unless pilot control shut-off
lever (1) is fully moved to the LOCK position, the
front control lever is not locked, possibly creating a
hazardous situation.
 When leaving the machine, always stop the engine.
Then, pull pilot control shut-off lever (1) up to the
LOCK position.
 Always pull pilot control shut-off lever (1) up to the
LOCK position before transporting the machine and
leaving the machine.
 Confirm that pilot control shut-off lever (1) is in the
LOCK position before starting the engine. The engine
will not start in other than the LOCK position.

Engine Stop Switch

In case the engine does not stop even if the key switch is
turned OFF due to failure of the machine, move switch (2)
located at the front-left side of the seat stand downward to
stop the engine.
After operating switch (2), be sure to return the switch back to
the upward position.
OPERATOR'S STATION
1-102
1
LOCK position
1
UNLOCK Position
2
MDCN-01-008
MDCN-01-009
MDCN-01-004