The selected work mode is indicated by attachment mode
indicator (2) of basic screen (1).
Select the work mode corresponding to the work in which the
machine is engaged while referring to the table below.
Work Mode
Digging Mode
Breaker 1 to 5 Mode
Pulverizer 1 to 5 Mode
Crusher 1 to 5 Mode
Vibrating Hammer 1 to 5
Mode
Grapple 1 to 5 Mode
Clamshell 1 to 5 Mode
Others 1 to 5 Mode
f
NOTE: 36 work modes shown above are designated as the
standard specifications. Up to 11 attachment modes other
than the digging mode can be designated. Consult your
nearest Hitachi dealer for adding or changing the designation
of the attachment modes.
OPERATING THE MACHINE
Description
Select this mode when using bucket.
Select this mode when using breaker.
Select this mode when using pulverizer.
Select this mode when using crusher.
Select this mode when using vibrating hammer.
Select this mode when using grapple.
Select this mode when using clamshell.
Select this mode when other than the above attachment is used.
5-15
2
1
MDAA-01-001EN