Model Identification; Capacitor Electrical Discharge Processing - Sony HBD-TZ140 Service Manual

MODEL IDENTIFICATION

– Back cabinet –
Model
US GSE200292-0008
CND GSE200292-0009
AEP, UK GSE200292-0002
RU GSE200292-0003
E3, SAF GSE200292-0010
E32 GSE200292-0006
MX GSE200292-0007
BR GSE200292-0012
SP1 GSE200292-0001
TH GSE200292-0005
PH GSE200292-0013
AU1 GSE200292-0004
• Abbreviation
AU1 : Australian and New Zealand models
BR : Brazilian model
CND : Canadian model
E3 : Middle East & African models (Except South African)
E32 : Latin American model (Except Brazilian, Mexican)
MX : Mexican model
PH : Philippines model
RU : Russian model
SAF : South African model
SP1 : South East Asian (Except Indian,Thai),
East Asian (Hong Kong, Mongolia),
Oceanian (Except Australian, New Zealand) models
TH : Thai model
Part No.
Part No.
NOTE OF REPLACING THE IC101, IC102 AND IC103 ON
THE MAIN BOARD AND THE COMPLETE MAIN BOARD
When IC101, IC102 and IC103 on the MAIN board and the
complete MAIN board are replaced, it is necessary to spread the
compound (THERMAL COMPOUND (G747)) (Part No. J-2501-
221-A ) between parts and heat sink.
Spread the compound referring to the fi gure below.
– MAIN Board (Component Side) –
IC103

CAPACITOR ELECTRICAL DISCHARGE PROCESSING

When checking the board, the electrical discharge is necessary for
the electric shock prevention.
Connect the resistor to both ends of respective capacitors.
• POWER board
C905
– POWER Board (Conductor Side) –
C905
HBD-TZ140
IC102 IC101
800
2 W
5