Sony HCD-RV990D Service Manual

Sony HCD-RV990D Service Manual

Dvd deck receiver
Table of Contents

Advertisement

HCD-RV660D/RV990D

SERVICE MANUAL

Ver 1.3 2004. 09
• HCD-RV660D/RV990D are the
tuner, deck, DVD and amplifier
section in MHC-RV660D/RV990D.
Amplifier section
The following measured at AC 120, 127, 220, 240 V,
50/60 Hz
Continuous RMS power output (reference)
Front speaker:
100 + 100 watts
(6 ohms at 1 kHz, 10%
THD)
Center speaker*:
40 watts (8 ohms at 1 kHz,
10% THD)
Surround speaker*:
40 + 40 watts
(6 ohms at 1 kHz, 10%
THD)
* MHC-RV990D only
Inputs
MD/VIDEO (AUDIO) IN (phono jacks):
voltage 450/250 mV,
impedance 47 kilohms
GAME (VIDEO) IN (phono jack):
1 Vp-p, 75 ohms
GAME (AUDIO) IN (phono jack):
voltage 250 mV,
impedance 47 kilohms
MIC (phone jack):
sensitivity 1 mV,
impedance 10 kilohms
Outputs
MD/VIDEO (AUDIO) OUT (phono jacks):
voltage 250 mV,
impedance 1 kilohm
VIDEO OUT (phono jack):
max. output level
1 Vp-p, unbalanced, Sync
negative, load impedance
75 ohms
Sony Corporation
9-961-078-04
2004I04-1
Audio Group
© 2004. 09
Published by Sony Engineering Corporation
(Photo: HCD-RV990D)
Model Name Using Similar Mechanism
DVD
DVD Mechanism Type
Section
Optical Pick-up Name
Tape Deck Model Name Using Similar Machanism
Section
Tape Transport Mechanism Type
SPECIFICATIONS
S-VIDEO OUT (4-pin/mini-DIN jack):
COMPONENT VIDEO OUT:
PHONES (stereo mini jack):
Front speaker:
Surround speaker (except for MHC-RV660D):
Center speaker (except for MHC-RV660D):
SUB WOOFER OUT:
E Model
Australian Model
NEW
CDM74S-DVBU23
DBU-1
HCD-RG550
CWM43RR-23
Y: 1 Vp-p, unbalanced,
Sync negative,
C: 0.286 Vp-p, load
impedance 75 ohms
Y: 1 Vp-p, 75 ohms
P
, P
: 0.7 Vp-p, 75 ohms
B
R
accepts headphones of
8 ohms or more
Use only the supplied
speaker SS-RV990
Use only the supplied
speaker SS-RS390
Use only the supplied
speaker SS-CT390
voltage 1 V,
impedance 1 kilohm
– Continued on next page –
DVD DECK RECEIVER
1

Advertisement

Table of Contents
loading

Summary of Contents for Sony HCD-RV990D

  • Page 1: Service Manual

    MD/VIDEO (AUDIO) OUT (phono jacks): voltage 250 mV, impedance 1 kilohm VIDEO OUT (phono jack): max. output level 1 Vp-p, unbalanced, Sync negative, load impedance DVD DECK RECEIVER 75 ohms Sony Corporation 9-961-078-04 2004I04-1 Audio Group © 2004. 09 Published by Sony Engineering Corporation...
  • Page 2 COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
  • Page 3 HCD-RV660D/RV990D MODEL IDENTIFICATION CAUTION Use of controls or adjustments or performance of procedures – BACK PANEL – other than those specified herein may result in hazardous radiation exposure. NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electrostatic breakdown because of the potential difference generated by the charged electrostatic load, etc.
  • Page 4: Table Of Contents

    2-8. Back Panel Section ............11 2-9. Main Board (HCD-RV990D) ..........12 2-10. Main Board (HCD-RV660D) ..........12 2-11. Surround Board, Front AMP Board (HCD-RV990D) ..13 2-12. DVD Mechanism Block, DMB03 Board, Video Board ..13 2-13. Pick-up Unit ..............14 2-14.
  • Page 5: General

    HCD-RV660D/RV990D SECTION 1 GENERAL This section is extracted from instruction manual.
  • Page 6 HCD-RV660D/RV990D...
  • Page 7: Disassembly

    2-12. DVD MECHANISM BLOCK, 2-8. BACK PANEL SECTION DMB03 BOARD, (Page 11) VIDEO BOARD (Page 13) 2-9. MAIN BOARD (HCD-RV990D) (Page 12) 2-13. PICK-UP UNIT (Page 14) 2-10. MAIN BOARD (HCD-RV660D) (Page 12) 2-14. SW BOARD, DRIVER BOARD 2-11. SURROUND BOARD,...
  • Page 8 HCD-RV660D/RV990D Ver 1.1 Note : Follow the disassembly procedure in the numerical order given. 2-1. CASE 5 four screws (+BVTT 3 × 6) 9 case 4 screw (case 3 TP2) 2 screw (case 3 TP2) 3 two screws (case 3 TP2) 6 three screws (+BVTT 3 ×...
  • Page 9 HCD-RV660D/RV990D Ver 1.1 2-3. FRONT PANEL SECTION 7 CN304 3 screw (+BVTP 3 × 8) 2 screw (+BVTP 3 × 8) 6 CN501 8 CN706 4 screw (+BVTP 3 × 8) qd CN503 qs connector qa CN502 0 connector qf front panel section 9 CN605 1 three screws (+BVTP 3 ×...
  • Page 10: Panel Board, Led Board, Remote Board

    HCD-RV660D/RV990D 2-5. TAPE MECHANISM DECK 2 two screws (+BVTP 2.6 × 8) 3 three screws (+BVTP 2.6 × 8) 1 connector 4 two screws (+BVTP 2.6 × 8) 5 tape mechanism deck 2-6. PANEL BOARD, LED BOARD, REMOTE BOARD 5 three screws (+BVTP 2.6 ×...
  • Page 11: Jack Board

    HCD-RV660D/RV990D Ver 1.1 2-7. JACK BOARD 1 two screws (+BVTP 2.6 × 8) 4 shield plate 6 JACK board 3 screw (+BVTT 3 × 6) 2 screw (+BVTT 3 × 6) 5 two mic knobs 2-8. BACK PANEL SECTION 3 CN901 qs back panel section 4 CN902 9 two screws...
  • Page 12: Main Board (Hcd-Rv990D)

    HCD-RV660D/RV990D Ver 1.1 2-9. MAIN BOARD (HCD-RV990D) 8 screw 7 two screws (+BVTT 3 × 6) (+BVTP 3 × 6) 6 screw (+BVTT 3 × 6) SURROUND board qd MAIN board two claws 0 CN901 5 screw (+BVTT 3 × 6)
  • Page 13: Surround Board, Front Amp Board (Hcd-Rv990D)

    HCD-RV660D/RV990D Ver 1.1 2-11. SURROUND BOARD, FRONT AMP BOARD (HCD-RV990D) 5 SURROUND board 2 CN372 4 two screws (+BVTP 3 × 1 6) 1 CN302 6 FRONT AMP board 3 two screws (+BVTP 3 × 16) 2-12. DVD MECHANISM BLOCK, DMB03 BOARD, VIDEO BOARD...
  • Page 14: Pick-Up Unit

    HCD-RV660D/RV990D 2-13. PICK-UP UNIT 8 floating screw (+PTPWH M2.6) 6 floating screw (+PTPWH M2.6) 0 insulator 9 two insulators 7 floating screw (+PTPWH M2.6) qa pick-up unit holder (DBU) assy 1 floating screw (+PTPWH M2.6) 5 RF board 4 CN001 3 CN003 2 two screws (+BTP M2.6)
  • Page 15: Sensor Board

    HCD-RV660D/RV990D 2-15. SENSOR BOARD 1 floating screw (+PTPWH M2.6) 2 tray 8 screw (+BTTP (M2.6)) 3 belt (table) 9 SENSOR board 4 floating screw (+PTPWH M2.6) 5 pulley (table) 6 floating screw (+PTPWH M2.6) 0 CN731 7 gear (geneva) 2-16. MOTOR (TB) BOARD 5 table motor assy (M741) 3 MOTOR (TB) board 4 Remove the two solderings of motor.
  • Page 16: Motor (Ld) Board

    HCD-RV660D/RV990D 2-17. MOTOR (LD) BOARD 2 two screws (+BTTP (M2.6)) 4 Remove the two solderings of motor. 3 MOTOR (LD) board 5 loading motor assy (M751) 1 belt (loading)
  • Page 17: Diagrams

    PANEL board • TUNER/AUDIO section no mark : no signal REMOTE board • TAPE section SURROUND board no mark : PLAY (HCD-RV990D) ) : REC • DVD section LED board no mark : STOP These are omitted. ) : PLAY MAIN board ∗...
  • Page 18: Printed Wiring Board -Dvd Mechanism Section (1/2)

    HCD-RV660D/RV990D • Refer to page 17 for Circuit Boards Location. 3-3. PRINTED WIRING BOARD — DVD MECHANISM SECTION (1/2) — • Refer to page 17 for Common Note on Printed Wiring Boards. : Uses unleaded solder. RF BOARD RF BOARD (SIDE A) (SIDE B) R041...
  • Page 19: Schematic Diagram -Dvd Mechanism Section (1/2)

    HCD-RV660D/RV990D • Refer to page 17 for Common Note on Schematic Diagrams. 3-4. SCHEMATIC DIAGRAM — DVD MECHANISM SECTION (1/2) — • Refer to page 51 for IC Block Diagrams. R026 C006 C028 C027 C013 C031 CN002 C030 C026 C025 R023 C029 C024...
  • Page 20: Printed Wiring Boards Dvd Mechanism Section (2/2)

    HCD-RV660D/RV990D • Refer to page 17 for Circuit Boards Location. 3-5. PRINTED WIRING BOARDS — DVD MECHANISM SECTION (2/2) — • Refer to page 17 for Common Note on Printed Wiring Boards. : Uses unleaded solder. M751 (Page 32) DISC TRAY ADDRESS DETECT CN751...
  • Page 21: Schematic Diagram –Dvd Mechanism Section (2/2)

    HCD-RV660D/RV990D • Refer to page 17 for Common Note on Schematic Diagrams. 3-6. SCHEMATIC DIAGRAM — DVD MECHANISM SECTION (2/2) — • Refer to page 52 for IC Block Diagrams. IC701 IC B/D CN721 CN704 R702 R701 M751 C751 D701 RE701 CN751 CN703...
  • Page 22: Printed Wiring Board -Dmb03 Section

    HCD-RV660D/RV990D • Refer to page 17 for Circuit Boards Location. 3-7. PRINTED WIRING BOARD — DMB03 SECTION — • Refer to page 17 for Common Note on Printed Wiring Boards. : Uses unleaded solder. (Page 32) (Page 37) CN202 R218 CN101 R217 D1308...
  • Page 23 HCD-RV660D/RV990D • Semiconductor Location Ref. No. Location D202 (D392) (D393) (D394) D901 R282 (D1101) R1202 R281 R280 R279 (D1102) D1203 R278 D1204 (D1201) B-13 D1201 (D1202) B-13 D1202 (D1203) B-12 R1201 (D1204) B-12 D1301 R219 D1302 D1303 R251 D1304 D1305 C237 C229 C236...
  • Page 24: Schematic Diagram -Dmb03 Section (1/8)

    HCD-RV660D/RV990D • Refer to page 17 for Common Note on Schematic Diagrams. 3-8. SCHEMATIC DIAGRAM — DMB03 SECTION (1/8) — • Refer to page 52 for IC Block Diagrams. (Page 29) (Page 27) CN107 JW607 R310 CL309 R311 R312 CL310 (Page 30) CL311 D392...
  • Page 25: Schematic Diagram –Dmb03 Section (2/8)

    HCD-RV660D/RV990D • Refer to page 17 for Common Note on Schematic Diagrams. 3-9. SCHEMATIC DIAGRAM — DMB03 SECTION (2/8) — • Refer to page 52 for IC Block Diagrams. R587 CL505 CL504 CL503 CL502 FL502 CL501 C522 C567 C568 R537 R569 R536 R545...
  • Page 26: Schematic Diagram -Dmb03 Section (3/8)

    HCD-RV660D/RV990D 3-10. SCHEMATIC DIAGRAM — DMB03 SECTION (3/8) — • Refer to page 17 for Common Note on Schematic Diagrams. R784 C701 R786 C705 R787 R700 C782 TP703 FL701 R788 FL706 C703 C715 C783 R789 C729 C708 C709 C712 R710 C711 C716 C717...
  • Page 27: Schematic Diagram -Dmb03 Section (4/8)

    HCD-RV660D/RV990D 3-11. SCHEMATIC DIAGRAM — DMB03 SECTION (4/8) — • Refer to page 17 for Common Note on Schematic Diagrams. (Page 25) JL521 R543 R547 R581 C526 C527 (Page 28) R580 R589 C519 R579 (Page 24, 30) IC501 R534 R535 C514 R533 C928...
  • Page 28: Schematic Diagram -Dmb03 Section (5/8)

    HCD-RV660D/RV990D • Refer to page 27 for Waveforms. • Refer to page 17 for Common Note on Schematic Diagrams. 3-12. SCHEMATIC DIAGRAM — DMB03 SECTION (5/8) — • Refer to page 53 for IC Block Diagrams. (Page 26) FL901 IC902 (Page 27) R901 C902...
  • Page 29: Schematic Diagram -Dmb03 Section (6/8)

    HCD-RV660D/RV990D • Refer to page 17 for Common Note on Schematic Diagrams. 3-13. SCHEMATIC DIAGRAM — DMB03 SECTION (6/8) — • Refer to page 54 for IC Block Diagrams. (Page 26) (Page 30) (Page 28) CN202 (Page 24) R270 RB202 CN105 R288 R1001...
  • Page 30: Schematic Diagram -Dmb03 Section (7/8)

    HCD-RV660D/RV990D • Refer to page 27 for Waveforms. • Refer to page 17 for Common Note on Schematic Diagrams. 3-14. SCHEMATIC DIAGRAM — DMB03 SECTION (7/8) — • Refer to page 54 for IC Block Diagrams. (Page 29) R269 R263 R264 R265 R266...
  • Page 31: Schematic Diagram -Dmb03 Section (8/8)

    HCD-RV660D/RV990D 3-15. SCHEMATIC DIAGRAM — DMB03 SECTION (8/8) — • Refer to page 17 for Common Note on Schematic Diagrams. (Page 30) (Page 30)
  • Page 32: Printed Wiring Board –Main Section

    HCD-RV660D/RV990D • Refer to page 17 for Circuit Boards Location. 3-16. PRINTED WIRING BOARD — MAIN SECTION — • Refer to page 17 for Common Note on Printed Wiring Boards. : Uses unleaded solder. (Page 20) (Page 22) (Page 22) (Page CN543 TM301...
  • Page 33: Schematic Diagram -Main Section (1/4)

    HCD-RV660D/RV990D 3-17. SCHEMATIC DIAGRAM — MAIN SECTION (1/4) — • Refer to page 17 for Common Note on Schematic Diagrams. C128 R271 R381 C152 R377 R382 C360 C150 R372 C310 JR456 R387 JW457 C143 R388 R361 R301 R371 C301 IC302 C311 FB561 C303...
  • Page 34: Schematic Diagram -Main Section (2/4)

    HCD-RV660D/RV990D 3-18. SCHEMATIC DIAGRAM — MAIN SECTION (2/4) — • Refer to page 17 for Common Note on Schematic Diagrams. R124 R397 Q377 J102 C125 R125 C136 CN902 C132 R161 C176 R163 Q102 R201 R203 R138 R128 R127 JR104 R202 C201 R160 R137...
  • Page 35: Schematic Diagram -Main Section (3/4)

    HCD-RV660D/RV990D 3-19. SCHEMATIC DIAGRAM — MAIN SECTION (3/4) — • Refer to page 17 for Common Note on Schematic Diagrams. C657 C625 R626 C622 R624 R623 C618 (Page 36) R630 C619 R627 C621 R622 R629 C662 C623 C620 C617 R621 CN602 C628 HP901...
  • Page 36: Schematic Diagram -Main Section (4/4)

    HCD-RV660D/RV990D 3-20. SCHEMATIC DIAGRAM — MAIN SECTION (4/4) — • Refer to page 17 for Common Note on Schematic Diagrams. (Page 34) (Page 35) CN805 FB862 C815 C814 (Page 38) D735 R755 CN708 C739 C791 R850 R753 D734 R754 R948 R849 R882 R848...
  • Page 37: Printed Wiring Board –Video Section

    HCD-RV660D/RV990D • Refer to page 17 for Circuit Boards Location. 3-21. PRINTED WIRING BOARD — VIDEO SECTION — • Refer to page 17 for Common Note on Printed Wiring Boards. : Uses unleaded solder. • Semiconductor Location Ref. No. Location (Page 22) (Page 39) D838...
  • Page 38: Schematic Diagram -Video Section

    HCD-RV660D/RV990D • Refer to page 17 for Common Note on Schematic Diagrams. 3-22. SCHEMATIC DIAGRAM — VIDEO SECTION — • Refer to page 54 for IC Block Diagrams. IC803 Q851 C851 C852 Q852 NO803 CN804 JW862 JW858 C877 C876 JW861 IC804 (Page 27) JW860...
  • Page 39: Printed Wiring Board -Jack Section

    HCD-RV660D/RV990D Ver 1.1 • Refer to page 17 for Circuit Boards Location. 3-23. PRINTED WIRING BOARD — JACK SECTION — • Refer to page 17 for Common Note on Printed Wiring Boards. : Uses unleaded solder. (Page 37) (Page 32) (Page 32) •...
  • Page 40: Schematic Diagram -Jack Section

    HCD-RV660D/RV990D Ver 1.1 3-24. SCHEMATIC DIAGRAM — JACK SECTION — • Refer to page 17 for Common Note on Schematic Diagrams. C517 IC501(2/2) IC501(1/2) C510 C515 C514 R507 C519 C518 R512 J503 R514 R513 C512 C516 R511 R510 R529 RV501 R509 R508 C511...
  • Page 41: Printed Wiring Board –Front Amp Section

    HCD-RV660D/RV990D • Refer to page 17 for Circuit Boards Location. 3-25. PRINTED WIRING BOARD — FRONT AMP SECTION — • Refer to page 17 for Common Note on Printed Wiring Boards. : Uses unleaded solder. (Page 47) (Page 43) (Page 32) (Page 32) (Page 43) (Page 47)
  • Page 42: Schematic Diagram -Front Amp Section

    HCD-RV660D/RV990D 3-26. SCHEMATIC DIAGRAM — FRONT AMP SECTION — • Refer to page 17 for Common Note on Schematic Diagrams. CN303 CN304 IC932 (Page 46) (Page 35) C934 C933 IC201 IC934 NO274 C273 NO273 R273 C938 C937 CN206 C274 R274 (Page 44) (Page 48) IC923...
  • Page 43: Printed Wiring Boards –Surround Amp Section

    HCD-RV660D/RV990D • Refer to page 17 for Circuit Boards Location. 3-27. PRINTED WIRING BOARDS — SURROUND AMP SECTION — • Refer to page 17 for Common Note on Printed Wiring Boards. : Uses unleaded solder. (Page 32) (Page 45) • Semiconductor Location Ref.
  • Page 44: Schematic Diagram -Surround Amp Section

    HCD-RV660D/RV990D 3-28. SCHEMATIC DIAGRAM — SURROUND AMP SECTION — • Refer to page 17 for Common Note on Schematic Diagrams. IC301 CN302 R316 (Page 42) Q316 R318 R317 Q317 CN304 R315 TH301 CN371 (Page 46) (Page 42) CN303 TM401 R311 R381 RY381 L381...
  • Page 45: Printed Wiring Boards -Panel Section

    HCD-RV660D/RV990D • Refer to page 17 for Circuit Boards Location. 3-29. PRINTED WIRING BOARDS — PANEL SECTION — • Refer to page 17 for Common Note on Printed Wiring Boards. : Uses unleaded solder. IC301 CN113 JR301 FL1001 JW104 C194 Q191 JW107 R195...
  • Page 46: Schematic Diagram -Panel Section

    HCD-RV660D/RV990D 3-30. SCHEMATIC DIAGRAM — PANEL SECTION — • Refer to page 17 for Common Note on Schematic Diagrams. NO807 CN102 FL1001 R131 D361 R132 D362 R133 D363 R134 D364 R135 D365 R136 D366 D101 D102 Q131 Q132 Q133 Q134 Q135 Q136 C133...
  • Page 47: Printed Wiring Board –Power Supply Section (1/2)

    HCD-RV660D/RV990D • Refer to page 17 for Circuit Boards Location. 3-31. PRINTED WIRING BOARD — POWER SUPPLY SECTION (1/2) — • Refer to page 17 for Common Note on Printed Wiring Boards. : Uses unleaded solder. (Page 49) LP902 Q971 JW957 T911 LP904...
  • Page 48: Schematic Diagram -Power Supply Section (1/2)

    HCD-RV660D/RV990D 3-32. SCHEMATIC DIAGRAM — POWER SUPPLY SECTION (1/2) — • Refer to page 17 for Common Note on Schematic Diagrams. D371 CN913 C371 JW972 C372 F914 (Page 42) D271 F916 CN915 C271 T911 F917 CN911 C272 F915 (Page 42) F918 (Page 50) F919...
  • Page 49 HCD-RV660D/RV990D Ver 1.1 • Refer to page 17 for Circuit Boards Location. 3-33. PRINTED WIRING BOARD — POWER SUPPLY SECTION (2/2) — • Refer to page 17 for Common Note on Printed Wiring Boards. : Uses unleaded solder. (Page 47) (Page 47) •...
  • Page 50: Schematic Diagram –Power Supply Section (2/2)

    HCD-RV660D/RV990D Ver 1.1 3-34. SCHEMATIC DIAGRAM — POWER SUPPLY SECTION (2/2) — • Refer to page 17 for Common Note on Schematic Diagrams. F913 F911 CN902 F912 JW903 JW913 JW907 JW906 (Page 48) R904 CN902 S901 RY901 C901 D901 Q901 T901 IC901 CN903...
  • Page 51: Ic Block Diagrams

    HCD-RV660D/RV990D 3-35. IC BLOCK DIAGRAMS IC001 SP3723BDAOPM (RF Board) 64 63 62 61 60 59 55 54 53 52 FAST ATTACK INPUT OUTPUT HOLD FULL WAVE AGC CHARGE INHIBIT RECTIFER PUMP PROGRAMMABLE FROM S-PORT EQUALIZER INPUT DVDRFP FILTER BIAS DVDRFN DIFFERENTIATOR INPUT INPUT...
  • Page 52 HCD-RV660D/RV990D IC701 BA6956AN (DRIVER Board) IC509 CXD3068Q (DMB03 Board) IC712 BA6956AN (DRIVER Board) CONTROL LOGIC IC302 PCM1608Y/2K (DMB03 Board) 32 31 30 36 35 34 33 VCC3 FUNCTION AGND3 CONTROL VCC4 INTERFACE AGND4 SYSTEM SCKI CLOCK SCKO MANAGER VOUT8 AGND6 VCC5 LRCK AGND5...
  • Page 53 HCD-RV660D/RV990D IC331 PCM1751DBQR (DMB03 Board) DATA LRCK DGND SYSTEM SYSTEM POWER CLOCK CLOCK SUPPLY MANAGER OUTPUT AMP SERIAL VOUTL CONTROL LOW-PASS PORT 4x/8x FILTER ENHANCED OVERSAMPLING MULTI-LEVEL DIGITAL DELTA-SIGMA FILTER MODULATOR WITH FUNCTION AUDIO OUTPUT AMP CONTROLLER SERIAL VOUTR PORT LOW-PASS FILTER AGND...
  • Page 54: Dmb03 Board

    HCD-RV660D/RV990D IC204 BR9040F-WE2 (DMB03 Board) IC252 TC7WH157FK (TE85R) (DMB03 Board) 8 WC DETECT 11 7 SUPPLY INSTRUCTION DECODE VOLTAGE CONTROL AND CLOCK 11 6 SELECT GENERATOR EN G HIGH WRITE VOLTAGE DISABLE GENERATOR ADDRESS ADDRESS 8bit DECODER INSTRUCTION BUFFER 8bit GND 4 4,096bit REGISTER...
  • Page 55: Exploded Views

    HCD-RV660D/RV990D Ver 1.1 SECTION 4 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • Abbreviation The components identified by mark 0 or dotted line with mark number in the exploded views are not supplied. E3 : 240 V AC area in E model 0 are critical for safety.
  • Page 56: Front Panel Section (1)

    HCD-RV660D/RV990D Ver 1.1 4-2. FRONT PANEL SECTION (1) FL1001 not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-244-686-01 VOLUME KNOB 4-243-610-01 BELT (AL) 1-688-364-12 REMOTE BOARD 4-245-758-01 PLATE (HEAD), SHIELD 1-688-363-12 LED BOARD A-4733-292-A JACK BOARD, COMPLETE (EXCEPT E51,MX,TH) A-4733-288-A PANEL BOARD, COMPLETE (EXCEPT TH) A-4733-293-A JACK BOARD, COMPLETE (E51,MX)
  • Page 57: Front Panel Section (2)

    HCD-RV660D/RV990D 4-3. FRONT PANEL SECTION (2) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-244-701-01 CASS DOOR SPRING (B) 4-244-661-21 SUB PANEL 4-238-631-01 TAPE SPRING 4-244-669-01 DISPLAY WINDOW 4-244-666-11 CASS DOOR (R) 4-231-824-01 CAM (A), HEART 4-244-668-01 CASS WINDOW (R) 4-231-836-01 SPRING (HEART CAM-A) 4-244-700-01 CASS DOOR SPRING (A)
  • Page 58: Front Panel Section (3)

    4-244-684-11 EQ BUTTON 4-245-942-41 PANEL, FRONT (RV660D:E51) 4-244-906-11 CONTROL BUTTON (B) 4-225-252-01 CUSHION (FOOT) 4-246-093-01 PAUSE BUTTON (B) 4-244-900-01 CURSOL BUTTON 4-244-679-11 DISC BUTTON 4-244-676-21 FUNCTION BUTTON 4-244-901-01 CURSOL HOLDER 4-244-677-01 POWER LENS 3-038-018-01 EMBLEM, SONY 4-244-678-01 FUNCTION LENS 4-246-096-01 LENS (DVD)
  • Page 59: Dvd Block Section

    HCD-RV660D/RV990D Ver 1.1 4-5. DVD BLOCK SECTION CDM74S-DVBU23 not supplied not supplied not supplied supplied not supplied not supplied not supplied not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-4733-300-A VIDEO BOARD, COMPLETE (EXCEPT TH) A-4733-092-A DMB03 BOARD, COMPLETE A-4747-997-A VIDEO BOARD, COMPLETE (TH) (RV990D:EXCEPT TH)
  • Page 60: Main Board Section (1/2)

    HCD-RV660D/RV990D Ver 1.1 4-6. MAIN BOARD SECTION (1/2) HCD-RV990D not supplied IC301 F919 IC201 not supplied not supplied IC921 F918 IC922 F915 IC923 IC934 F914 IC932 T911 F916 F917 not supplied HCD-RV660D not supplied Ref. No. Part No. Description Remark Ref.
  • Page 61: Main Board Section (2/2)

    HCD-RV660D/RV990D Ver 1.1 4-7. MAIN BOARD SECTION (2/2) HCD-RV990D not supplied IC301 F919 IC201 not supplied not supplied F918 IC921 IC922 F915 IC923 IC934 F914 IC932 T911 F916 F917 not supplied HCD-RV660D The components identified by not supplied mark 0 or dotted line with mark 0 are critical for safety.
  • Page 62: Dvd Mechanism Deck Section (1)

    HCD-RV660D/RV990D 4-8. DVD MECHANISM DECK SECTION (1) (CDM74S-DVBU23) M741 chassis assy Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-218-253-21 SCREW (M2.6), +BTTP 4-243-820-01 GEAR (TABLE) 1-776-182-11 WIRE (FLAT TYPE) (5 CORE) 4-243-819-01 GEAR (GENEVA) 1-687-134-11 MOTOR (TB) BOARD 4-243-816-01 TRAY 4-243-815-01 TABLE (LOADING) 4-243-823-01 BELT (TABLE)
  • Page 63: Dvd Mechanism Deck Section (2)

    HCD-RV660D/RV990D 4-9. DVD MECHANISM DECK SECTION (2) (CDM74S-DVBU23) RE701 M751 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No. Description Remark Ref. No. Part No.
  • Page 64: Electrical Parts List

    HCD-RV660D/RV990D SECTION 5 DMB03 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in • SEMICONDUCTORS When indicating parts by reference the parts list may be different from the In each case, u : µ, for example: number, please include the board. parts specified in the diagrams or the uA..
  • Page 65 HCD-RV660D/RV990D DMB03 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C324 1-107-820-11 CERAMIC CHIP 0.1uF C560 1-164-938-11 CERAMIC CHIP 0.0015uF 10% (RV990D) C561 1-107-820-11 CERAMIC CHIP 0.1uF C325 1-126-209-11 ELECT CHIP 100uF C563 1-164-874-11 CERAMIC CHIP 100PF (RV990D) C565...
  • Page 66 HCD-RV660D/RV990D DMB03 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C772 1-107-820-11 CERAMIC CHIP 0.1uF D1301 8-719-988-61 DIODE 1SS355TE-17 C773 1-125-891-11 CERAMIC CHIP 0.47uF D1302 8-719-988-61 DIODE 1SS355TE-17 C774 1-164-941-11 CERAMIC CHIP 0.0047uF 10% D1303 8-719-988-61 DIODE 1SS355TE-17 C775 1-107-820-11 CERAMIC CHIP 0.1uF...
  • Page 67 HCD-RV660D/RV990D DMB03 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC902 8-759-058-64 IC TC7S32FU(TE85R) R223 1-216-864-11 METAL CHIP 1/10W IC903 8-759-641-86 IC BR24C16F-E2 R224 1-216-864-11 METAL CHIP 1/10W IC904 6-702-563-01 IC TC7W74FK-TE85L R227 1-216-829-11 METAL CHIP 4.7K 1/10W IC906...
  • Page 68 HCD-RV660D/RV990D DMB03 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R307 1-216-813-11 METAL CHIP 1/10W R548 1-216-833-11 METAL CHIP 1/10W (RV990D) R550 1-216-821-11 METAL CHIP 1/10W R308 1-216-813-11 METAL CHIP 1/10W R551 1-216-821-11 METAL CHIP 1/10W R309 1-216-813-11 METAL CHIP 1/10W...
  • Page 69 HCD-RV660D/RV990D DMB03 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R715 1-216-833-11 METAL CHIP 1/10W R805 1-216-864-11 METAL CHIP 1/10W R716 1-216-809-11 METAL CHIP 1/10W R901 1-216-801-11 METAL CHIP 1/10W R717 1-216-845-11 METAL CHIP 100K 1/10W R902 1-216-801-11 METAL CHIP 1/10W...
  • Page 70 HCD-RV660D/RV990D DMB03 DRIVER FRONT AMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R9981 1-216-864-11 METAL CHIP 1/10W * CN703 1-564-720-11 PIN, CONNECTOR (SMALL TYPE) 4P R9986 1-216-864-11 METAL CHIP 1/10W CN704 1-785-328-11 PIN, CONNECTOR (LIGHT ANGLE) 2P R9987 1-216-864-11 METAL CHIP 1/10W...
  • Page 71 HCD-RV660D/RV990D FRONT AMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C253 1-162-286-21 CERAMIC 220PF Q232 8-729-119-78 TRANSISTOR 2SC2785-HFE C254 1-126-967-11 ELECT 47uF Q233 8-729-119-78 TRANSISTOR 2SC2785-HFE (RV660D) Q234 8-729-119-78 TRANSISTOR 2SC2785-HFE C254 1-126-968-11 ELECT 100uF Q251 8-729-140-84 TRANSISTOR 2SC1841-PAFAEA (RV990D)
  • Page 72 HCD-RV660D/RV990D FRONT AMP JACK Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R274 1-249-441-11 CARBON 100K 1/4W C525 1-136-495-11 FILM 0.068uF (RV990D) (EXCEPT E51,MX) 0 R280 1-215-892-11 METAL OXIDE C526 1-115-870-11 ELECT 0.47uF (RV990D) (EXCEPT E51,MX) 0 R280 1-216-457-00 METAL OXIDE 1.2K...
  • Page 73 HCD-RV660D/RV990D JACK LEAD PIN MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R504 1-216-841-11 METAL CHIP 1/10W D364 8-719-071-44 LED SELS5223C-TP15 (POWER STREAM) R505 1-216-833-11 METAL CHIP 1/10W D365 8-719-071-44 LED SELS5223C-TP15 (POWER STREAM) R506 1-216-833-11 METAL CHIP 1/10W D366...
  • Page 74 HCD-RV660D/RV990D MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C150 1-126-964-11 ELECT 10uF C335 1-126-964-11 ELECT 10uF (RV990D) C337 1-126-964-11 ELECT 10uF C151 1-126-795-11 ELECT 10uF (RV990D) C152 1-126-964-11 ELECT 10uF C338 1-126-964-11 ELECT 10uF C153 1-162-964-11 CERAMIC CHIP 0.001uF...
  • Page 75 HCD-RV660D/RV990D MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C629 1-162-963-11 CERAMIC CHIP 680PF < CONNECTOR > C630 1-126-947-11 ELECT 47uF C631 1-162-963-11 CERAMIC CHIP 680PF CN101 1-779-275-11 CONNECTOR, FFC (LIF(NON-ZIF)) 7P C632 1-162-963-11 CERAMIC CHIP 680PF CN102 1-568-830-11 CONNECTOR, FFC 11P...
  • Page 76 HCD-RV660D/RV990D MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < FERRITE BEAD > Q152 8-729-021-15 TRANSISTOR 2SD2351T106W Q153 8-729-021-15 TRANSISTOR 2SD2351T106W FB561 1-500-445-21 FERRITE, EMI (SMD) Q373 8-729-021-15 TRANSISTOR 2SD2351T106W (RV990D) FB801 1-500-445-21 FERRITE, EMI (SMD) Q374 8-729-021-15 TRANSISTOR 2SD2351T106W (RV990D) Q375...
  • Page 77 HCD-RV660D/RV990D MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R126 1-216-833-11 METAL CHIP 1/10W R307 1-216-841-11 METAL CHIP 1/10W R127 1-216-818-11 METAL CHIP 1/10W (RV990D) R128 1-216-841-11 METAL CHIP 1/10W R309 1-216-825-11 METAL CHIP 2.2K 1/10W R129 1-216-825-11 METAL CHIP...
  • Page 78 HCD-RV660D/RV990D MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R381 1-216-845-11 METAL CHIP 100K 1/10W R661 1-216-809-11 METAL CHIP 1/10W (RV990D) R662 1-216-821-11 METAL CHIP 1/10W R382 1-216-833-11 METAL CHIP 1/10W R663 1-216-821-11 METAL CHIP 1/10W (RV660D) R664...
  • Page 79 HCD-RV660D/RV990D MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R769 1-216-829-11 METAL CHIP 4.7K 1/10W R867 1-216-809-11 METAL CHIP 1/10W R770 1-216-829-11 METAL CHIP 4.7K 1/10W R868 1-216-809-11 METAL CHIP 1/10W R774 1-216-864-11 METAL CHIP 1/10W R869 1-216-809-11 METAL CHIP...
  • Page 80 HCD-RV660D/RV990D MOTOR (LD) MOTOR (TB) PANEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-687-133-11 MOTOR (LD) BOARD < DIODE > ***************** D101 8-719-988-61 DIODE 1SS355TE-17 ************************************************************* D102 8-719-988-61 DIODE 1SS355TE-17 1-687-134-11 MOTOR (TB) BOARD D126 8-719-071-41 LED SELS5923C-TP15 (DVD) D127 8-719-071-41 LED SELS5923C-TP15 (TUNER/BAND)
  • Page 81 HCD-RV660D/RV990D PANEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-216-829-11 METAL CHIP 4.7K 1/10W R213 1-216-833-11 METAL CHIP 1/10W 1-218-867-11 METAL CHIP 6.8K 1/10W R214 1-216-833-11 METAL CHIP 1/10W 1-216-833-11 METAL CHIP 1/10W R1016 1-216-835-11 METAL CHIP 1/10W 1-216-835-11 METAL CHIP 1/10W...
  • Page 82 HCD-RV660D/RV990D REMOTE Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-688-364-12 REMOTE BOARD C042 1-164-218-11 CERAMIC CHIP 180PF 0.25PF 50V C049 1-107-826-11 CERAMIC CHIP 0.1uF ************** < CONNECTOR > < CONNECTOR > CN113 1-816-423-11 SOCKET, CONNECTOR 3P CN001 1-815-031-11 CONNECTOR, FFC/FPC (ZIF) 24P CN002...
  • Page 83 HCD-RV660D/RV990D SENSOR SUB TRANS SURROUND AMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R041 1-216-821-11 METAL CHIP 1/10W < RELAY > ************************************************************* 0 RY901 1-755-467-11 RELAY (POWER) 1-687-132-11 SENSOR BOARD < SWITCH > ************** 0 S901 <...
  • Page 84 HCD-RV660D/RV990D SURROUND AMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C381 1-136-165-00 FILM 0.1uF R307 1-249-417-11 CARBON 1/4W (RV990D) (RV990D) C382 1-136-165-00 FILM 0.1uF R308 1-249-431-11 CARBON 1/4W (RV990D) (RV990D) C383 1-136-165-00 FILM 0.1uF R309 1-249-441-11 CARBON 100K 1/4W...
  • Page 85 HCD-RV660D/RV990D SURROUND AMP TRANS Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R359 1-249-441-11 CARBON 100K 1/4W A-4733-305-A TRANS BOARD, COMPLETE (RV990D) (RV990D:EXCEPT E51,AUS,MX,TH) R360 1-260-076-11 CARBON 1/2W F A-4733-308-A TRANS BOARD, COMPLETE (RV990D:AUS) (RV990D) A-4733-311-A TRANS BOARD, COMPLETE (RV990D:E51) R381 1-260-330-11 CARBON 1.5K...
  • Page 86 HCD-RV660D/RV990D VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-4733-300-A VIDEO BOARD, COMPLETE (EXCEPT TH) < COIL > A-4747-997-A VIDEO BOARD, COMPLETE (TH) FB818 1-412-473-21 INDUCTOR (SMALL TYPE) ********************** FB821 1-412-473-21 INDUCTOR (SMALL TYPE) < CAPACITOR > FB824 1-412-473-21 INDUCTOR (SMALL TYPE) FB827...
  • Page 87 HCD-RV660D/RV990D Ver 1.1 Ref. No. Part No. Description Remark MISCELLANEOUS *************** 1-769-956-11 WIRE (FLAT TYPE) (11 CORE) 1-696-656-11 WIRE (FLAT TYPE) (13 CORE) 1-769-912-11 WIRE (FLAT TYPE) (9 CORE) 1-796-487-31 DECK, MECHANICAL 1-757-079-11 WIRE (FLAT TYPE) (17 CORE) 1-827-412-11 WIRE (FLAT TYPE) (7 CORE) 1-827-411-11 WIRE (FLAT TYPE) (25 CORE) (RV990D) 1-827-413-11 WIRE (FLAT TYPE) (13 CORE) (RV660D) 0 259...
  • Page 88 HCD-RV660D/RV990D MEMO...
  • Page 89 HCD-RV660D/RV990D E Model Australian Model SERVICE MANUAL Ver 1.3 2004. 09 SUPPLEMENT-1 File this supplement with the service manual. Subject : Addition of Service Positions, Test Mode, Mechanical Adjustments, Electrical Adjustments, Block Diagrams and IC Pin Descriptions. TABLE OF CONTENTS 1.
  • Page 90: Service Positions

    MAIN board (CN101) – DMB03 board (CN101) (Part No. J-2501-241-A) extension cable MAIN board (CN301) – DMB03 board (CN107) HCD-RV660D: 13 core (Part No. J-2501-102-A) HCD-RV990D: 25 core (Part No. J-2501-199-A) 1-2. TC MECHANISM BLOCK TC mechanism block...
  • Page 91: Tying Of Wires

    HCD-RV660D/RV990D 1-3. TYING OF WIRES To be fixed with the lead pin to avoid contact with the heat sink.
  • Page 92: Test Mode

    HCD-RV660D/RV990D 2. TEST MODE [Cold Reset] [GC Test Mode] • The cold reset clears all data including preset data stored in the • This mode is used to check the fluorescent indicator tube, LEDs, RAM to initial conditions. Execute this mode when returning keyboard, volume and phones.
  • Page 93 HCD-RV660D/RV990D [MC Test Mode] [Aging Mode] • This mode is used to check operations of the respective sections This mode can for operation check of tape deck section. of Amplifier, Tuner, and Tape. • If an error occurred: Procedure: The aging operation stops and display then status. •...
  • Page 94 HCD-RV660D/RV990D [DVD Service Mode] 2. CDM Error History <CDM74S Error History Display> • The sequence during the aging mode is following as below. 11 digits are displayed after the M character. Aging mode sequence (DVD section): Example of display : M0FF400220000 Tray Turn 1st digit : Indicates the error history number.
  • Page 95 HCD-RV660D/RV990D [REPEAT 5 LIMIT OFF MODE] DVD OSD Test Mode • This mode is used to enable infinite repetitions. Normally, the number of repetitions allowed is 5. [GENERAL DESCRIPTION] Procedure: The Test Mode allows you to make diagnosis and adjustment easily 1.
  • Page 96 HCD-RV660D/RV990D • Example display 0-3. EEPROM Check 0-3-1. Sampling Check EEPROM check at every 64 words. ### Syscon Diagnosis ### It compares read data with write data of each address. When there are discrepancies between two data, it displays error. Diag All Check No.2 Version 0-3-2.
  • Page 97 HCD-RV660D/RV990D 1-1. DVD-SL (single layer) 1-3. DVD-DL (dual layers) Press the 1 button on the remote commander and insert a DVD Press the 3 button on the remote commander and insert a DVD single layer disc following the message. Then the adjustment will dual layers disc following the message.
  • Page 98 HCD-RV660D/RV990D In using the manual operation menu, take care of the following Mirr Time : Mirror time of between disc surface and record points. These commands do not provide protection, thus requiring surface when disc type judgment. (hexadecimal correct operation. The sector address or time code field is displayed number) when a disc is loaded.
  • Page 99 HCD-RV660D/RV990D when CLVA is turned on, the usual trace mode becomes active. In for the selected item will be displayed, then increase or decrease the trace mode, DVD sector address or CD time code is displayed. numeric value with the O button or o button. If CLV has been This is not displayed where the spindle is not locked.
  • Page 100 HCD-RV660D/RV990D 2-9. SACD Water Mark Check (Not used) EEPROM Data 2/2 CDRW DVDRW Focus Gain SACD Water Mark Check Trk. Gain Focus Offset Trk. Offset Boost PSP AMP Prev:UP Default:CLR Exit:RET Start: ENTER Stop: RETURN On this screen, current servo adjusted data stored in the EEPROM are displayed.
  • Page 101 HCD-RV660D/RV990D xxxxhxxm : The laser on total hours. Data below minutes are aa: Initialization is completed or not. omitted. : Complete. : Error number. other number : Not complete. : Error code. bb: Operating status of mechanism deck at an error occurred. : Not used.
  • Page 102: Mechanical Adjustments

    HCD-RV660D/RV990D Ver 1.3 3. MECHANICAL ADJUSTMENTS 6. VERSION INFORMATION Precaution On the Test Mode Menu screen, selecting 6 displays the ROM 1. Clean the following parts with a denatured alcohol-moistened version and region code. swab: The parenthesized hexadecimal number in version field is checksum record/playback heads pinch rollers value of ROM.
  • Page 103: Electrical Adjustments

    HCD-RV660D/RV990D Ver 1.3 4. ELECTRICAL ADJUSTMENTS Checking Location: VIDEO SECTION – DMB03 BOARD (SIDE A) – Note: 1. VIDEO board is basically designed to operate without adjustment. Therefore, check each item in order given. 2. Use DVD reference disc unless othermise indicated. [DVD reference disc] LUV-P01 (CD) : PART No.
  • Page 104 HCD-RV660D/RV990D 2. Turn the adjustment screw and check output peaks. If the peaks DECK SECTION 0 dB=0.775 V do not match for L-CH and R-CH, turn the adjustment screw so that outputs match within 1dB of peak. 1. Demagnetize the record/playback head with a head demagnetizer.
  • Page 105: Block Diagrams

    HCD-RV660D/RV990D 5. BLOCK DIAGRAMS 5-1. DVD DSP SECTION IC509 CD DECODER, OPTICAL PICK-UP IC001 BLOCK DVD/CD AMP CDDOUT DOUT IC701 IC207 DVDRFP RFAC 50 RFAC DVD SYSTEM PROCESSOR DVD DECODER 44,41,39,35 177-174, SDDATA0-SDDATA7, IEC958 117 RFIN HDB0-HDB8 IEC958 32,30,27,24,25 171-168,182 SDERROR DATA3 DATA3(CSW)
  • Page 106: Dvd Dsp Section

    HCD-RV660D/RV990D 5-2. DAC SECTION IC252 OPTICAL OUT SELECTOR IC302 ICE958 OPTICAL J102 DIGITAL OUT DIGITAL SUB WOOFER CDDOUT (OPTICAL) RV990D IC301 IC301 IC302 CDSEL TM401 SOUND CONTROL POWER AMP AUDIO DAC DATA0 DATA4 VOUT3 IN SUR DATA1(SEL) SURROUND VOUT4 LINK IN Q381 DATA1 R-CH...
  • Page 107: Main Section

    HCD-RV660D/RV990D 5-3. MAIN SECTION • Signal Path TM301 : FM ANTENNA : PB (DECK A) FM 75Ω : PB (DECK B) COAXIAL : REC (DECK B) R-CH TONE SECTION • R-CH is omitted due to same as L-CH. MUTE OVERLOAD DET (Page 18) VDD+10V •...
  • Page 108: Dvd Sys Section

    HCD-RV660D/RV990D 5-4. DVD SYS SECTION IC101 IC1104 (3/3) DISPLAY CONTROL MASTER CONTROL IC392 S13-24 Q191 FUNCTION AU+3.3V AU+5V 22 KEY0 DISPLAY STANDBY DISPLAY KEY DRIVER D192 S31-35,37-44 I / I IC211 I / I POWER KEY FUNCTION KEY1 D+1.8V D+3.3V IC921 D126-130,137 S51-64...
  • Page 109: Ic Pin Descriptions

    HCD-RV660D/RV990D 6. IC PIN DESCRIPTIONS • IC701 TMC57929PGF-RDP (DVD DECODER) (DMB03 Board (3/8)) Pin No. Pin Name Pin Description 1, 2 D5, D6 Two-way data bus signal input from/output to mechanism control IC. — Ground Two-way data bus signal input from/output to mechanism control IC. Address signal input from/output to mechanism control IC.
  • Page 110 HCD-RV660D/RV990D Pin No. Pin Name Pin Description — Ground 62, 63 HCS0, HCS1 Not used (Open) — Power supply pin (+3.2 V) DASP Not used (Fixed at H) 66 to 69 MDB0 to MDB3 Two-way data bus signal input from/output to 16Mbit D-RAM IC. —...
  • Page 111 HCD-RV660D/RV990D Pin No. Pin Name Pin Description Spindle motor control signal output to focus/tracking coil driver, spindle/sled motor driver IC. Middle point voltage (+1.65 V) input MDIN2 Spindle motor servo drive signal input MDIN1 MDP input VCCA1 — Power supply pin (+3.2 V) CLVS Control signal output to selection the spindle control filter constant at CLVS.
  • Page 112 HCD-RV660D/RV990D • IC901 CXP973064-226R (MECHANISM CONTROL) (DMB03 Board (5/8)) Pin No. Pin Name Pin Description NO_USE Not used (Open) Serial data enable signal output to CD/DVD/SACD RF amp, focus/tracking error amp SDEN DOCTRL/ISBTEST Digital out ON/OFF control signal output to CD decoder, digital servo processor IC. XRST_2753 Not used (Open) SDA_EEP...
  • Page 113 HCD-RV660D/RV990D Pin No. Pin Name Pin Description 56, 57 CONTROL_2, CONTROL_1 Not used (Open) GFS_DVD Guard frame sync signal input from DVD decoder IC. MUTE_CD Muting ON/OFF control signal output to CD decoder, digital servo processor IC. Muting ON/OFF control signal output to focus/tracking coil driver, spindle/sled motor MUTE_2D driver IC.
  • Page 114 HCD-RV660D/RV990D • IC207 ZIVA5X-C1F (DVD SYSTEM PROCESSOR) (DMB03 Board (7/8)) Pin No. Pin Name Pin Description VDDP — Power supply pin (+3.2 V) (I/O signal) Address bus signal input from/output to bus interface IC. 3 to 11 HAD15 to HAD7 Data bus (address signal multiplexed) signal input from/output to bus interface IC.
  • Page 115 LRCK signal output to 2CH DAC IC (HCD-RV660D) and D/A converter IC (HCD- LRCK RV990D). BCK signal output to 2CH DAC IC (HCD-RV660D) and D/A converter IC (HCD- RV990D). DATA0(DM) Audio data (down mix signal) output to D/A converter IC (HCD-RV990D).
  • Page 116 Power supply pin (+3.2 V) (I/O signal) GNDP — Ground (I/O signal) DATA2(SLR) Audio data (rear L/R signal) output to D/A converter IC (HCD-RV990D). DATA3(CSW) Audio data (center/subwoofer signal) output to D/A converter IC (HCD-RV990D). IEC958 S/PDIF signal output DAI_DATA...
  • Page 117 HCD-RV660D/RV990D • IC1104 M30620MCN-A28FP (SOUND CONTROL) (MAIN Board (4/4)) Pin No. Pin Name Pin Description S-OUT Serial out signal output S-CLK Serial clock signal output M61530-CLK M61530FP clock signal output SIRCS Sircs signal input M61530-DATA M61530FP data output M61529-DATA M61529FP data output M61529-CLK M61529FP clock signal output EXT.BUS-INPUT...
  • Page 118 HCD-RV660D/RV990D Pin No. Pin Name Pin Description B-TRG Trigger out ON/OFF select signal output (deck B) (L: OFF, H: ON) A-SHUT-IN Reel pulse signal input (deck A) B-SHUT-IN Reel pulse signal input (deck B) — Power supply pin (+3.3 V) SWFR-MUTE Sub woofer mute ON/OFF select signal output (L: ON, H: OFF) —...
  • Page 119 HCD-RV660D/RV990D • IC101 µPD780232GC-081-8BT (SYSTEM CONTROL, FL DRIVER) (PANEL Board) Pin No. Pin Name Pin Description — Power supply pin (+5 V) — Ground System clock signal input (5 MHz) System clock signal input (5 MHz) Directly connect to ground. RESET Reset signal input (active L) S-CLK...
  • Page 120 HCD-RV660D/RV990D REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2002. 05 Corrected errors.

This manual is also suitable for:

Hcd-rv660d

Table of Contents