Table of Contents
Advertisement
USER GUIDE
5.3
AUDIO AND VIDEO
Connect the LCD projector to a video source as shown in the rear foldout.
Use a TV set as a local video monitor if desired (the data monitor may not
be used as a video monitor).
Connect the AV cable (6) to the AUDIO and VIDEO connectors on the LCD
projector. Then connect the AV cable to the audio out connectors and
video out connector on the video source. Connect sound to the correct
AUDIO channel (S-VIDEO or VIDEO).
S-VIDEO, often referred to as S-VHS, may be connected using an optional
S-VIDEO cable.
Connect external speakers (8) as shown. The internal speaker is switched
off when external speakers are connected.
For added boost, an external amplifier may be connected to the speaker
output (8).
Connect the microphone (7) to the projector as shown.
APPLICABLE CABLES:
SOURCE
S-VIDEO
VIDEO
AUDIO (COMPUTER,
S-VIDEO, VIDEO)
MICROPHONE
SPEAKER
TO SET UP FROM THE BATMOUSE:
STEP
OPERATION
1
Press S-VIDEO or VIDEO depending on input used
2
If necessary, press MENU, then POSITION correctly
3
If necessary, in the MENU under PICTURE, adjust COLOR
saturation and TINT (only NTSC)
4
Adjust CONTRAST, BRIGHTNESS and VOLUME
CABLE
S-VIDEO (4 pin mini DIN connector)
AV cable (RCA jacks)
AV cable (RCA jacks and 3.5 mm jack)
Microphone cable (3.5 mm jack)
Speaker cable (3.5 mm jack)
12
LCD PROJECTOR
Advertisement
Table of Contents
