Computer - Ask Proxima Impression 750 User Manual

USER GUIDE
5.1

COMPUTER

Connect the LCD projector, computer and monitor as show in the rear
foldout page (see Connection Layout).
Connect cable (2) between the LCD projector and the computer. Use the
Y-split on the computer end to connect the monitor.
If you have a Macintosh, EGA, CGA or NEC computer, insert applicable
adapters (3) and (4) as described in the table below.
If needed, connect sound to the COMPUTER AUDIO input.
APPLICABLE ADAPTERS :
COMPUTER
VGA
EGA/CGA
MACII c../v../LC/ Quadra/Powerbook/ Duo etc.
NEC 9801
TO SET UP FROM THE BATMOUSE REMOTE CONTROL:
STEP OPERATION
1 Press RESET for default settings
2 Press MENU, then select TUNE and adjust with cursor keys
3 In the menu, select POSITION, press the LEFT key, then
adjust with cursor keys
4 Press MENU again to close the menu
5 Adjust CONTRAST and BRIGHTNESS as desired
ADAPTER
None
EGA/CGA (option)
MACII (640 x 480)
(included)
NEC 9801(option)
9
LCD PROJECTOR