Message Catalog - JUKI DX-4000QVP Instruction Manual

8. Message catalog

* The message is erased by carrying out the relevant operation indicated by the message or pressing the button on
the screen.
When the sewing machine
starts up, or when the nee-
dle moves.
The needle is moved by
pressing [OK].
Then, the initial screen is
displayed.
This pictograph is displayed
when "JUKI Smart
Feed" detection sensor
detects while the pattern
which cannot be sewn with
"JUKI Smart Feed".
123
When one of the buttonhole
stitches is selected and the
buttonhole sensor pin is not
connected, the machine
starts to sew.
When the bobbin thread
amount has reduced.
The sewing can be contin-
ued 30 stitches in this state.
When a stitch pattern other
than buttonholes is selected
but the buttonhole sensor
pin is connected, the ma-
chine starts to sew.
When you have tried to
start the sewing machine by
pressing the start/stop but-
ton while the foot controller
is connected to the sewing
machine.
This pictograph is displayed
when the safety device is
activated while the presser
foot goes up.
When changing from the
stitch type from the 1-nee-
dle straight stitch to the
standard stitch.