Introduction Of Optional Accessory Parts - JUKI DX-4000QVP Instruction Manual

10. Introduction of optional accessory parts

Make your home sewing more pleasant!
Please purchase the following items in the shop where you buy our products.
Button attaching presser foot
●
This presser foot is used to attach buttons on
garments.
Pearl attaching presser foot
●
With this presser foot it is possible to attach
pearls, beads and thick cord.
Presser foot with guide
●
As the presser foot has markings, which show
2 mm distance, these marking will serve as a
guide.
Binder presser foot
●
It is possible to attach tapes such as bias tape
into four folds.
Twin needle
●
By using two needles beautiful decorative stitch-
es can be sewn. (Twin needle with size: 2.0 mm)
requires the adapter shank.
Cording and Embroidery presser
●
foot
It is used in free motion quilting and a cord can
be sewn together with this presser foot.
129
Hemming presser foot for zigzag
●
Fabric edge is hemmed by zigzag while rolling
it under. Used for bottom of shirts, blouses, frills
and the edge of handkerchiefs.
Appliqué presser foot
●
Since the front and back of the presser foot is
short, it is easy to move the materials at curve
points. Also fabrics can be seen easily because
it is transparent.
Cording presser foot
●
It is possible to attach 1 - 3 cords by three-point
zigzag or decorative stitch.
Invisible zipper foot
●
As a seam does not appear on the right side of
the fabric, an opening can be finished with fabric
edges neatly butted.
Smooth presser foot
●
This presser foot is used for non-slippery materi-
als like vinyl and satin stitches.
Quilt presser foot (open type)
●
It is used in free motion sewing. As the front
portion is open, it is easy to see the needle en-
try point.