Sharp AQUOS sense3 Instruction Manual page 92

4 Switch to video
z Switch to a video call.
5 Add call/Swap
z Place a current call on hold and make a call to another party.
z Touch [Swap] after adding a call to switch the call party.
z Subscription to Call Waiting Service is required to add a call.
6 End call
z End a call.
7 Speaker/Sound
z You can talk with hands-free.
z Set the audio output destination when a Bluetooth device is
connected.
8 Hold
z Hold a call. To unhold a call, touch again.
z Subscription to Call Waiting Service is required to use hold.
9 Switch camera
z Switch to the front camera/standard camera.
a Your own image
b The other party's image
Note the followings to use hands-free or video call.
z
y Speak approximately 20 to 40 cm away from the mouthpiece.
When the surroundings are noisy, the sound may break up
and the call may not be satisfactory.
y When calling outdoors, in a location where surroundings are
noisy or where the sound echoes loudly, use an earphone/
microphone.
y If the sound breaks up during a hands-free call, lower the
in-call volume.
Adjusting the in-call volume
„
1
1/2 during a call
Switching to voice call
„
Switch to a voice call during a video call.
1
[ ] during a call▶[Switch to voice call]
Switching image area
„
Switch displaying area of the other party's/your own image during a
video call.
1
[ ] during a call▶[Switch video area]
Voice memo
„
Record a voice memo during a voice call.
1
[ ] during a call▶[Voice Memo]
2
[Stop]
90
Call/Phonebook